Restitors and other products

Do you have a technical question that doesn't really fit a specific console? Want some general info on electronics, hacking, making cookies, etc? Here's the place to ask! Go nuts.

Moderator: Moderators

Post Reply
Zer000
Posts: 6
Joined: Thu Oct 01, 2009 10:01 am

Restitors and other products

Post by Zer000 »

HI,
I'm comming from Germany and I wanne make a Portable like in the book of BenHeck, and I am just finding 220-ohm resistors with 0.5W , at Radio Shack it are 1/2W , is that important ? general, is the Watt number important ?(for the Video Signal)
Transitors, what is important? cause I get them not fromRadio Shack, just from conrad.de and I find there Resitors, but which requirements are Important!????(Also for the Video Signal)


thanks
Kevin
timmeh87
Senior Member
Posts: 3047
Joined: Mon Nov 14, 2005 10:19 pm
Location: Ontario, Canada

Re: Restitors and other products

Post by timmeh87 »

0.5 and 1/2 are the same number :wtf:

So yeah those parts would be the same.

The watt rating describes how much current it takes to destroy the resistor, it gives the upper limit on how much power the resistor can absorb. The watt rating on small (information) signals is not usually that important, because the amount of power present is less than 1/8W.

Transistors, its important to know the kind of transistor (BJT, MOSFET, JFET), although you are probably using BJT transistors for circuits dealing with video. Then the polarity is also important, in your case the choice is between NPN and PNP. If you get the wrong one it will never work. Other than that something like a 'general purpose' 2N2222 or something is acceptable.

http://en.wikipedia.org/wiki/2N2222" onclick="window.open(this.href);return false;

If you dont understand the terms Im using then put them into wikipedia.
Image

"Linux is only free if your time is worthless"
Zer000
Posts: 6
Joined: Thu Oct 01, 2009 10:01 am

Re: Restitors and other products

Post by Zer000 »

timmeh87 wrote:0.5 and 1/2 are the same number :wtf:

So yeah those parts would be the same.
OOOOOkay, sry I thought they mean ~1~2 somthing like between or so :D:D:D sry ;)
timmeh87 wrote: The watt rating describes how much current it takes to destroy the resistor, it gives the upper limit on how much power the resistor can absorb. The watt rating on small (information) signals is not usually that important, because the amount of power present is less than 1/8W.

Transistors, its important to know the kind of transistor (BJT, MOSFET, JFET), although you are probably using BJT transistors for circuits dealing with video. Then the polarity is also important, in your case the choice is between NPN and PNP. If you get the wrong one it will never work. Other than that something like a 'general purpose' 2N2222 or something is acceptable.

http://en.wikipedia.org/wiki/2N2222" onclick="window.open(this.href);return false;

If you dont understand the terms Im using then put them into wikipedia.
Okay thank you ^^^ I try ^
Post Reply