Xbox- Thermal Wattage
Moderator: Moderators
-
ttsgeb
- Posts: 155
- Joined: Mon Feb 25, 2008 9:19 pm
- 360 GamerTag: ttsgeb
- Steam ID: ttsgeb
- Location: behind you, don't look, I'll just be behind you.
Xbox- Thermal Wattage
Does anyone know what the thermal wattage of the xbox is? I'm looking at different heatsinks to put in it, and the wattage would be a nice bit to know.
-
snowpenguin
- Posts: 1306
- Joined: Thu Jun 11, 2009 4:10 pm
Re: Xbox- Thermal Wattage
I'm sure you could figure it out looking at a few datasheets
.
Or if you're recasing it just put some monster ones in there. Hurrrr.
Or if you're recasing it just put some monster ones in there. Hurrrr.
-
ttsgeb
- Posts: 155
- Joined: Mon Feb 25, 2008 9:19 pm
- 360 GamerTag: ttsgeb
- Steam ID: ttsgeb
- Location: behind you, don't look, I'll just be behind you.
Re: Xbox- Thermal Wattage
recasing, but not in a way that monster ones would be usable. . .
Re: Xbox- Thermal Wattage
I don't have the data off hand, but if you are recasing then I will give the same recommendation as you will get from a lot of other people - water cooling. Use a 200w picoPSU and one of these http://shop.sickmods.net/product/ATX_to ... nverter_2/" onclick="window.open(this.href);return false; to free up a small mountain of space. This is presuming the xbox is 1.2 - 1.5 in version. I am sure other guides exist for 1.0 - 1.1 and 1.6, but this is the only commercially available solution that I have seen so far.
With the extra space in the PSU area you have a bit more room to play with. I would also recommend moving to a 2.5 inch HDD instead of 3.5. They save a lot of space too. If you can sacrafice the DVD drive without too many qualms, drop her out as well. Without going to water cooling you have dropped a fair bit of height just with that alone. With water, you can drop your heatsinks and start looking at maybe half the size of the original.
With the extra space in the PSU area you have a bit more room to play with. I would also recommend moving to a 2.5 inch HDD instead of 3.5. They save a lot of space too. If you can sacrafice the DVD drive without too many qualms, drop her out as well. Without going to water cooling you have dropped a fair bit of height just with that alone. With water, you can drop your heatsinks and start looking at maybe half the size of the original.
