Psone Screen help

[Designer noob]

yeah, that should work, but it might take a while to charge a 3300mah battery since that charger is for a 2000mah battery.

[SDCEX]

battery seems to be working fine now, I have fully charged the battery, the problem was the battery wasnt getting fully charged, like you stated! THANKS for the help.

[64M320N3]

Any time, my man.

[Designer noob]

lol, I am sorry I didn't know you were helping him. Don't try to take the credit.

Also, no problem any time you need anything just post a topic or pm me and I will answer.

[64M320N3]

lol, I am sorry I didn't know you were helping him. Don't try to take the credit.

Also, no problem any time you need anything just post a topic or pm me and I will answer.

No, the problem is your CHARGER.
If you charge the thing for 4 hours and the battery still isn't full then you have a charger that supplies very minimal amps. Try a Ni-Mh/Cd Quick Charger, and you should be fine.
The problem is that the battery is simply not charged enough. Since the Cathode backlight is the thing that requires the most draw, it will be the first to go when not enough amps are supporting it.

I DID help. And beside that fact, I was right too.

[Life of Brian]

lol, I am sorry I didn't know you were helping him. Don't try to take the credit.

No, 64M320N3 had the most accurate answer so he does get credit. No one denies that you were trying to help, but you were mistaken about a few things. I wasn't aware that you owned this thread, Designer noob. Also, while schmelly may have been a bit harsh in telling you that you were wrong, I think he was worried that you were giving bad advice that may have been hazardous if SDCEX had followed it. You then turned around and called him an ass. We're all friends here (or close to it), so relax. You were right about a few things too, so don't think I'm trying to say you were totally wrong.

[64M320N3]

Thanks, LOB.
I owe you one.

[Designer noob]

Yeah, thats fine, but he came in like he did it all. I think I deserve a portion.

[64M320N3]

I think I deserve a portion.

I don't really get what you mean. You can take whatever you want.
The Benheck community was made for helping each other, not fighting each other. Information is shared, it is not secluded to any one group. Therefore anybody can help anybody else if they have the right knowledge. Do help people out. PLEASE help out.
I didn't mean to be imposing. I was just saying your welcome for the things I contributed. You can do the same. I wasn't stealing anything from you.

[schmellyfart]

lol, I am sorry I didn't know you were helping him. Don't try to take the credit.

No, 64M320N3 had the most accurate answer so he does get credit. No one denies that you were trying to help, but you were mistaken about a few things. I wasn't aware that you owned this thread, Designer noob. Also, while schmelly may have been a bit harsh in telling you that you were wrong, I think he was worried that you were giving bad advice that may have been hazardous if SDCEX had followed it. You then turned around and called him an ass. We're all friends here (or close to it), so relax. You were right about a few things too, so don't think I'm trying to say you were totally wrong.

Exactly.

[snowpenguin]

Designer noob, you gave tons of "info" in this thread that was absolutely and utterly false. You said his battery "needed a protection circuit or it would explode". IT'S A NIMH. You said it was an 8.5 v battery. IT IS 7.2 V. You said he should get that battery and charger. IT WAS A DIFFERENT VOLTAGE.

Quit posting crap when you don't know what you're talking about.

[Designer noob]

First, the only thing that I said was bad was the protection circuit.

Second, I never said that battery was 8.5v. He said his battery was 7.2v but, it charges to 8.4v so, I don't see how I was wrong there.

Third, I didn't even look at the charger so, thats really not like I did it on purpose.

So, all in all I only really gave one bad piece of advice that wouldn't have done anything if he got one or not. So, I don't think I did anything bad at all.

Plus, I was the first one to tell him to charge his battery to 100% so, don't give my crap like the only thing I do is bad. I usually give at least 1 bad piece of advice per topic, but I am also the only one ever really talking so, what ever. Only when I make mistakes is when you guys jump in and talk.

[Kurt_]

Designer Noob: Shut up. Only speak when you have useful information to contribute. You're passing off a lot of uninformed assumptions as fact. You're looking for a ban. Swallow your pride, admit you were wrong, and stfu.

[Designer noob]

lol, you shut the hell up. I haven't done anything wrong. I have been talking in a calm voice unlike you. You guys are the ones that keep bringing this up and I am just defending myself. Ban me if you want, I rather not hang around people like you, that can't control themselves. If you can't control yourself with a person over the internet, dude you have some serious issues. If I were you I would look into that, hope you can fix yourself.

Best of luck

[snowpenguin]

Designer noob, you truly are a noob, aren't you?

That post made me cry. He can control himself just fine, and no, you were not the only one getting info, no you do not deserve 'credit' for the right answer when you had the wrong one, and seriously, you give yourself credit for saying, "charge the batteryz hur."?