Will this work out (I have searched the forum)

[Steamdnt]

So, To start off, FIRST POST !!!11one
Ok That was my retarded internet slang for the year. Anyways, building my dreamcast laptop I will set the pinouts as follows

PSone Screen | Dreamcast Av-multi-out
2 | 2
4 | 3
5 | 10
7 | 3
14+220uf cap| 9
11+220uf cap| 16
12+220uf cap| 15

As for power, I will take 3.3v from pin one, 5v from pin 5 and 12v from pin 10, I will then ground out Ps on. i will then take power from pin 10 again, and run it through the 7808 and run it to the psone screen.
Will this work, is there anything that I am missing, could you criticize it please.

What do I do with all the grounds? Would i just connect them to one common ground?

[Steamdnt]

Ok so for the power could i use This Pico Psu http://www.mini-box.com/picoPSU-90?sc=8&category=981" onclick="window.open(this.href);return false;

And this battery http://www.batteryspace.com/index.asp?P ... rodID=1987" onclick="window.open(this.href);return false;

[themadhacker]

yes on the picopsu, and no for the battery.

It has no where near enough mah.

[Steamdnt]

what about two of these http://www.batteryspace.com/index.asp?P ... rodID=4802" onclick="window.open(this.href);return false;