Powering a genesis, 9V battery?

Includes but not limited to: SNES, Genesis, Sega CD, PlayStation 1, Nintendo 64, Dreamcast, Game Gear and I guess the Virtual Boy.

Moderator: Moderators

Post Reply
doonbugie
Posts: 6
Joined: Wed Jul 08, 2009 1:41 pm

Powering a genesis, 9V battery?

Post by doonbugie »

I'm wondering if I could run a genesis on a 9v battery, I dont really care what else I can run it on other then if I can run a genesis model 1 for even a minute or two.
ttsgeb
Posts: 155
Joined: Mon Feb 25, 2008 9:19 pm
360 GamerTag: ttsgeb
Steam ID: ttsgeb
Location: behind you, don't look, I'll just be behind you.

Re: Powering a genesis, 9V battery?

Post by ttsgeb »

Out of boredom, I've tried it on my Nomad, I never got it to fully power up though, it instantly read low battery, but that may have been because it was not fresh. With a new battery, it might work, but then again, it may explode from the high discharge rate.
doonbugie
Posts: 6
Joined: Wed Jul 08, 2009 1:41 pm

Re: Powering a genesis, 9V battery?

Post by doonbugie »

I dont think it would fry it, Because with batteries, I think It draws what it needs. And Nomad's and Genesis Model 1's Voltage rating is 9v.
Cotter
Posts: 14
Joined: Tue Jun 23, 2009 2:31 am

Re: Powering a genesis, 9V battery?

Post by Cotter »

I know you can easily run a Genesis 3 off a 9V battery through the regulator. Not sure about any of the other models.

Edit:

From "WHATS THE MAX VOLTAGE FOR A SEGA GENISIS MODEL 2"
Skyone wrote:~25v technically (if you want enough heat to last through an Alaskan winter). :P Input voltage gets fed a 7805 voltage regulator, so the minimum is 7.2v.

HOW WAS THAT ANSWER WAS THAT GOOD
So I guess the Genesis 2 has a 7805 as well. For the record, I don't think you'd fry any game console using a 9V battery.
ttsgeb
Posts: 155
Joined: Mon Feb 25, 2008 9:19 pm
360 GamerTag: ttsgeb
Steam ID: ttsgeb
Location: behind you, don't look, I'll just be behind you.

Re: Powering a genesis, 9V battery?

Post by ttsgeb »

I should have been less ambiguous in my statement, the battery *could* explode, but then again, it might not. Anyways, in theory it should work, but reality is mean sometimes.
themadhacker
Senior Member
Posts: 2670
Joined: Wed Aug 06, 2008 7:53 pm
Location: ohio

Re: Powering a genesis, 9V battery?

Post by themadhacker »

yeas, the Genny 2 has a 7805.
rest in peace, Ronnie James Dio! \m/
eurddrue
Senior Member
Posts: 2367
Joined: Fri Jul 18, 2008 1:26 pm
Location: I am so caught up in real life I have to be done for a while. I'll still check in but dontexpectmuch

Re: Powering a genesis, 9V battery?

Post by eurddrue »

Cotter wrote: From "WHATS THE MAX VOLTAGE FOR A SEGA GENISIS MODEL 2"
Skyone wrote:~25v technically (if you want enough heat to last through an Alaskan winter). :P Input voltage gets fed a 7805 voltage regulator, so the minimum is 7.2v.

HOW WAS THAT ANSWER WAS THAT GOOD
Actually, 35v max, 5.9-6.5 (differs on all of my 7805's) minimum for the 7805.
Banned indefinitely if you desperately need to contact me STOPPHONESPAMPLOX Please dont be a dick and call for something random like "HEY YURDRUE DOO U HAZ SPAM?"
wallydawg wrote:
chainfire95 wrote:220V I believe
I think we should check to see if you can withstand 220 volts
tom61
Senior Member
Posts: 1517
Joined: Fri Mar 25, 2005 6:51 pm

Re: Powering a genesis, 9V battery?

Post by tom61 »

ttsgeb wrote:I should have been less ambiguous in my statement, the battery *could* explode, but then again, it might not. Anyways, in theory it should work, but reality is mean sometimes.
Alkaline batteries are not that reactive. If you can set fire to steel wool by shorting it across the terminals with no real damage to the battery, you're not going to get one to catch fire by simply trying to power something too big to run off it.

Anyways, considering the weird power supplies that I've seen actually power a Genesis, a 9Volt alkaline battery should work. I have bought a Genesis 2 from a garage sale that came with a 4.5Volt labeled power supply. I had thought it got bundled with the Genesis 2 by mistake, but decided to try it anyway, and it actually worked. Either there is a Schlotky(sp?) diode that bypasses the 7805, or the power brick actually outputs more than 4.5Volts.
Post Reply