Please help with the correct order of wires

[marceloespunyti]

I'm buying one old n64 that suports rgb.. i will do some mod like the vga mod on dreamcast (i will open a whole in the plastic and use a dsub 15 female)
Ps:. I know that i need fist do some things first on the n64 console etc..

One image:



http://img23.imageshack.us/i/rgbl.jpg" onclick="window.open(this.href);return false;
http://img23.imageshack.us/i/rgbl.jpg/" onclick="window.open(this.href);return false;

[Dr. Killjoy]

Well for starters, here's the pinout for a standard 15-pin D-sub:

http://pinouts.ru/Video/VGA15_pinout.shtml" onclick="window.open(this.href);return false;

You should only need to use pins 1,2,3, and 13 for the RGB signal and 5,6,7,8, and 10 for ground. Just keep in mind that the RGB signal coming out is analog and runs at 15 kHz, not the standard 31 kHz of typical monitors; so a line doubler would be necessary.