n64 regulator question
Moderator: Moderators
-
MarioOwnsAll
- Posts: 228
- Joined: Wed Mar 11, 2009 9:49 am
n64 regulator question
ok im using the pth08080waz as a regulator and i need to soder a 100uf to it along with a 2.2k resistor but im not sure where to soder them and I also dont know where to soder the 3.3 line and the 12v line. can someone help me?
-
Basement_Modder
- Portablizer
- Posts: 962
- Joined: Sun Aug 24, 2008 7:16 am
- Location: Next door to my neighbor
- Contact:
Re: n64 regulator question
This link should suit your needs.
Also- You don't need 12v to power the N64, you only need approx. 7.2, But 7.4v batteries are your best bet. Hope this helps.
-Basement_Modder
Also- You don't need 12v to power the N64, you only need approx. 7.2, But 7.4v batteries are your best bet. Hope this helps.
-Basement_Modder
Cheers,
Basement_Modder
_________________
Basement_Modder
_________________
-
MarioOwnsAll
- Posts: 228
- Joined: Wed Mar 11, 2009 9:49 am
Re: n64 regulator question
YES THIS HELPED SO MUCH THANK YOU SO MUCH FOR POSTING THIS LINK, I can complete my n64p nowBasement_Modder wrote:This link should suit your needs.
Also- You don't need 12v to power the N64, you only need approx. 7.2, But 7.4v batteries are your best bet. Hope this helps.
-Basement_Modder