FS: Vacuum forming plastic! PICS

[khaag]

I have access to 2'x2' sheets of polystyrene plastic sheets that would be absolutely perfect for vacuum forming. They are 0.080" (2mm) thick. I work at a hardware store so I can get my staff discount on them. I'd be able to sell the sheets for $10 each + shipping, and then cut them to smaller sizes based on your specifications to reduce the cost of shipping.

If anybody is interested, let me know.

[khaag]

Oops, definitely put this in the wrong forum. Could a mod please move this to the Trading post?

[vskid]

Oops, definitely put this in the wrong forum. Could a mod please move this to the Trading post?

Done.

[khaag]

Thank you muchly!

[khaag]

Picture of a sheet used in forming:



Come on people! Anyone interested?

[palmertech]

I would if I had a table.

How long do you forsee access to this plastic?

[khaag]

As long as I work at Rona! As for not having a vac-table, just build one! I built mine with scrap MDF I had laying around and I did it in an hour and a half. Works really well too. I'll put up some plans if anyone is interested.

[palmertech]

If I build one, I will probably make a really small one. Makes storage and building it easier, and the suction will work better over a smaller area.

[khaag]

Yeah, mine has a 12"x12" forming area.

[Hifeno]

I would be interested in instructions on vacuum forming table and how to do it.

[argelfraster]

nice guitar in the background

[mikeyg]

I would be interested in instructions on vacuum forming table and how to do it.

Me too. I'll also buy that plastic, if we get the instructions.

[khaag]

INSTRUCTIONS YOU SHALL HAVE!

http://forums.benheck.com/viewtopic.php?f=31&t=31370" onclick="window.open(this.href);return false;

[Hifeno]

Thank you very much. As soon as I get the table done I will be buying some plastic from you. If you can still get it. Again Thank you