-----------------------
UPDATE 1
----------------------
--trinity 7 inch lcd portable tv set
--two 7.2v batterys one is 2000mah other is 500mah
--n64 (|_[]|_)
--split controller/psp oval shape design idea for the case
--starting tomarrow
-----------------------
UPDATE 2
----------------------
--got the n64 case opened using a pen to make the tool to open it
--screen working at 9.6v:)
--can the n64 run off of 9.6v for the 12v and how would i go about steping down the voltage to 3.3v for the n64?
--can i got the n64 wired and working with the screen av only though not the power
-----------------------
UPDATE 3
----------------------
--found a 9.6v rechargeable and i get a long time about two hour out of it idk the mah it doesnt say it on there but it works and also can i use 9.6v with the samples that take 9v from ti ??
-----------------------
UPDATE 4
----------------------
--still working on finding a way for 3.3v
--working on case ideas
might make a vac table for that-----------------------
UPDATE 5
----------------------
-- the part from ti should be here tomarrow or monday so as soon as it get here ill get back to work
--soughtered in the controller
-----------------------
UPDATE 6
----------------------
--looking for a case
--working on hooking up the ti part
--heres the design
controler|sceen|other half controler
then the n64 on the back
-----------------------
UPDATE 7
----------------------
--got n64 running off batterys
--with screen
--ordered zn-45 case
--need new batterys thou for better batter life
-----------------------
UPDATE 8
----------------------
--now using 8aa's
--case is here
--bypased the crack mobo part
--and abt to finsh the conntrols