PSone LCD Backlight/inverter repair?

[Teitoku]

Hi all...
I picked up a PSone screen with a defective backlight. Turns out, the inverter's come loose from the PCB. I'd like to try soldering it back in place, but I can't find where to solder what looks like the ground connection. I'll post a photo when I'm able, but for now, it's the side of the inverter with the two leads, not the four, that's come off. Tore off whatever it was connected to. I can see a spot to connect the upper of those two leads to, but I have no idea what the lower should be connected to. Does it even connect to anything?

[DK]

Could always LED mod it. Much easier and it means it's a lot more energy efficent.

[Teitoku]

I could, but it wouldn't be any easier than soldering two leads down. I'm not concerned with the power, either, as this isn't going to be for a portable. Speaking of power, any idea how much the backlight draws? I'd like to plug it into a DC supply and see if it even works before I bother soldering anything.

[Life of Brian]

You know, looking at my screen's board that lower lead doesn't look like it's actually connected to anything. I used my multimeter and it's not connected to ground, and I don't see any traces leading away from it.