LED MOD(I know its an old topic)

[Bandrien]

ok
I havent seen this one around so I figured i would make a topis to answer my own and everyone elses question.
If you are doing and led mod,what do you do about those white squares in the psone screen?They completely get in the way!should I dremel them out?

[thewise1]

I wish I someone had pics of the inside of the screen. I know there's the led mod guide by ben but there aren't many pics, I would feel better if I knew what's inside and what the bulb looks like so I know what to remove.

[Kurt_]

It's not much, but it's all I have.



The reason nobody has pictures is to minimize opened time, to minimize any trapped dust or debris.

That's what you'll see after removing the LCD and diffusing material.

If the white columns are getting in the way, you're not using 3mm LEDs.

The bulb is routed through the channel on the outside. You can't mistake it for anything else.

[thewise1]

I guess I should be fine then when my led's arrive from mouser.com. (my radio shack aint got squat.

[Bandrien]

Thanks
I think I have 3mm but even if I do,do I place themin between the corner and the white blocks or beside that just a little?

[Kurt_]

Go with the flow. They go in the only way they fit.