the Woodie DS

eurddrue · Post by **eurddrue** » Fri Mar 13, 2009 8:03 pm

I can't quit thinking about your woodie!!

@twilight, yeh, we probably scare lots of people away

Post by **Skyone** » Fri Mar 13, 2009 8:40 pm

Would you guys all shut up with the poor innuendos?

eurddrue · Post by **eurddrue** » Fri Mar 13, 2009 8:46 pm

meh, mine was pretty poor, but there have been some that made me lol hard

thewise1 · Post by **thewise1** » Fri Mar 13, 2009 9:21 pm

Skyone wrote:Would you guys all shut up with the poor innuendos?

We'll know if it's getting out of hand if one member says more than one, or if a whole page has only "phrases". But I have to admit that We are getting a bit out of had here.

palmertech · Post by **palmertech** » Fri Mar 13, 2009 9:59 pm

thewise1 wrote:
Skyone wrote:Would you guys all shut up with the poor innuendos?
But I have to admit that We are getting a bit out of hand here.

Agreed. All the innuendo is old by now, this is way out of hand.

Let's get this woodie back in hand, pronto.

...

Rekarp, a serious question: Are you going to use the plastic LED guides? Or are you going to do something different? I think you should change the power LED to yellow, personally.

attacknick · Post by **attacknick** » Fri Mar 13, 2009 10:00 pm

nice one

thewise1 · Post by **thewise1** » Fri Mar 13, 2009 10:12 pm

And so the fun ensues, lol, nice rekarp. Every time I see the red light on my ds it feels like a punch in the face.

Rekarp · Post by **Rekarp** » Wed Mar 18, 2009 5:14 pm

Ok I am pulling this thread back on the rails.

Been working all day on it and I am not done for today. Just waiting for glue to dry.

More in a couple hours.

jjhammerstein · Post by **jjhammerstein** » Wed Mar 18, 2009 5:23 pm

The depressed ports and jacks are caused by the thickness of the wood, right? And there's nothing you can do about it? Lame. Looking excellent though! I'm glad you're back to posting!

Rekarp · Post by **Rekarp** » Wed Mar 18, 2009 5:29 pm

jjhammerstein wrote:The depressed ports and jacks are caused by the thickness of the wood, right? And there's nothing you can do about it? Lame. Looking excellent though! I'm glad you're back to posting!

It won't look as bad as the pictures when I round the edges out so it will be more "flush".

jjhammerstein · Post by **jjhammerstein** » Wed Mar 18, 2009 5:40 pm

I noticed that there are gaps around some of the ports, specifically the charging port.

schmellyfart · Post by **schmellyfart** » Wed Mar 18, 2009 5:46 pm

jjhammerstein wrote:I noticed that there are gaps around some of the ports, specifically the.. whatever one it is. Looks like mini-USB.

That would be the charging port.

Rekarp · Post by **Rekarp** » Wed Mar 18, 2009 6:13 pm

jjhammerstein wrote:I noticed that there are gaps around some of the ports, specifically the charging port.

Yep there needs to be some wiggle room. If I make it really tight then issues like wood moisture and flex became a pain.When working with plastic issues such as this are non existent. Makes working with wood more of a challenge then plastics. Sometimes the grain of the wood splits and you are basically out the work you just put into the part.

Bibin · Post by **Bibin** » Wed Mar 18, 2009 7:33 pm

If I were you I'd make some small blocks to glue into the corners to preserve it's integrity, though I assume you've already worked that out.

Rekarp · Post by **Rekarp** » Wed Mar 18, 2009 8:25 pm

Bibin wrote:If I were you I'd make some small blocks to glue into the corners to preserve it's integrity, though I assume you've already worked that out.

Yep wood glue soaks into the wood. Harder then wood

benheck.com Forums

the Woodie DS

Re: the Woodie DS

Re: the Woodie DS

Re: the Woodie DS

Re: the Woodie DS

Re: the Woodie DS

Re: the Woodie DS

Re: the Woodie DS

Re: the Woodie DS

Re: the Woodie DS

Re: the Woodie DS

Re: the Woodie DS

Re: the Woodie DS

Re: the Woodie DS

Re: the Woodie DS

Re: the Woodie DS