Interference issue.

[ShockSlayer]

Hey I need you guys to help me figure out something. I have the same problem that LoB had w/his n64p, but with my GCp. There are weird diagonal lines on the screen. Now, The screens power is 11.1v from the battery to a 7.5v TI stepdown. Should I put the coil+diode before the regulator or after the regulator? I'm thinking after because before hasn't worked.

Oh, and what kind of coil and diode should I use? I found a random coil and diode in a old computer PSU.

SS

[nevermind1534]

It should go after the regulator, since it's the regulator that creates the signal noise.

[asdfjkl;]

lob said to use the choke and diode that was actually part of the psone screen.

[ShockSlayer]

Okay, 'll try t after the reg. That was a Zenith psone screen. Mine is normal.

SS

[asdfjkl;]

I thought that they had the exact same insides, no?

[ShockSlayer]

Yes and no. The main mobo is the same, but the original input isn't. Afterall, it would be weird to buy a screen with a psone input port on it.

SS