screen pin layout

qerkdtx · Post by **qerkdtx** » Wed Jan 07, 2009 10:20 am

Hey I was wondering if for my psonep do I hook up all twelve wires too the screen, or just ground sound and video. Also if I should only hook up those four what is the pin layout for those. If been searching the forums for a while now and have come up black. Thanks

footinmouth · Post by **footinmouth** » Wed Jan 07, 2009 10:48 am

http://forums.benheck.com/viewtopic.php ... sc&start=0 try this, it helped me

qerkdtx · Post by **qerkdtx** » Wed Jan 07, 2009 11:30 am

Ahh perfect, this is exactly what I need.

Thanks

footinmouth · Post by **footinmouth** » Wed Jan 07, 2009 3:25 pm

qerkdtx wrote:Ahh perfect, this is exactly what I need.

Thanks

Your welcome but i think Gannon deserves the credit, after all im still a newb.

bacteria · Post by **bacteria** » Wed Jan 07, 2009 8:33 pm

Pic corrects pin 9 and 10.

footinmouth · Post by **footinmouth** » Thu Jan 08, 2009 10:34 am

Gannon's pinout had pins 9 and 10 reversed

? his diagram worked for me when i tested my screen back in october, before i ripped it apart to get brighter leds (I still haven't, newark electronics is b*tch

).

Kyo · Post by **Kyo** » Thu Jan 08, 2009 10:43 am

9 and 10 are left and right for RGB mode. You wouldn't notice

bacteria · Post by **bacteria** » Thu Jan 08, 2009 10:45 am

I wondered if anyone was going to question this!

If you look at the reverse of the PSone screen board:

(this is for RGB audio not composite).

This is probably why LOB thought the headphone jack diagram was the wrong way around - turns out it was fine.

In the pic above, the right pin is marked as Right and the last but one is Left.

footinmouth · Post by **footinmouth** » Thu Jan 08, 2009 10:46 am

Kyo wrote:9 and 10 are left and right for RGB mode. You wouldn't notice

oh ok thanks

benheck.com Forums

screen pin layout

screen pin layout

diagram

np

???