NOAC Problem

Ok64ismine · Post by **Ok64ismine** » Sun Nov 23, 2008 4:20 pm

Want some help find were I'm going to solder to get my NOAC chip working. All NOAC soldering patterns I've seen are all without the connector, but I've got mine left so I can't really see were to solder.

It's from a Super Joy III just so you know, but it looks different from everything else I've seen.

My english isn't that good, but I hope you understand what I'm writing

.

tom61 · Post by **tom61** » Sun Nov 23, 2008 7:34 pm

What do you mean by "were I'm going to solder to get my NOAC chip working"?

Ok64ismine · Post by **Ok64ismine** » Sun Nov 23, 2008 7:41 pm

Like soldering pattern for example. Where to solder what - where to solder the Audio out, the video out, where to solder 5v etc.

HotDog-Cart · Post by **HotDog-Cart** » Mon Nov 24, 2008 6:54 am

Thats not the whole system. There should be 2 more boards. One for controllers, and one for audio. Heck, some models have a 3rd board, which connects to the board pictured.

Ok64ismine · Post by **Ok64ismine** » Mon Nov 24, 2008 8:13 am

Oh.. Just had this part left for some reason - other parts where thrown out for a couple of years ago. I kept this because it had the FC connector. What I've seen the part that is used for NOAC portables are just this small part, nothing else, but am I wrong?

Valium · Post by **Valium** » Mon Nov 24, 2008 2:52 pm

You're not wrong, since everything else can just be soldered straight to that board anyway, it's just going to be harder on you since you don't know which pins are which without the other board.

themadhacker · Post by **themadhacker** » Mon Nov 24, 2008 4:44 pm

I too would like to know what each of the pins got to .

Ok64ismine · Post by **Ok64ismine** » Tue Nov 25, 2008 7:06 am

I think I've found one board that are identical to mine and that board is inside G-force NOAC NES controller

. Well, have to look on his pics and see if there's something to help me ^^.

Kyo · Post by **Kyo** » Tue Nov 25, 2008 9:36 am

you could just ask him for a pinout...

Ok64ismine · Post by **Ok64ismine** » Tue Nov 25, 2008 6:17 pm

That's an option as well

.