Dilemma - NTSC GameCube screen or NTSC PSone screen?

If you're making a portable you probably need something to watch it on. (Unless you want to guess what's happening in the game, but I wouldn't advise that) Anyway, this forum is your "Hacking a pocket TV/screen" one-stop solution. Share your experiences and knowledge here.

Moderator: Moderators

Post Reply
bacteria
Portablizer Extraordinaire
Posts: 3984
Joined: Fri Apr 20, 2007 12:14 am
Location: Hampshire, UK
Contact:

Dilemma - NTSC GameCube screen or NTSC PSone screen?

Post by bacteria »

Going to buy a Retro Duo soon, although I want to resolve the issue with the screen first.

Compatibility with SNES PAL carts is not as good as NTSC I know, but I need a small board to fit in my case as a full sized SNES PAL board is too big. I know also that some games run slowly on the Duo if there are lots of sprites on the screen at the same time, not surprising though as the system seems to work about 1/3 the speed of a SNES (as I recall); it is only a Chinese clone system after all.

The Retro Duo might work ok on a PAL screen with modding but I get the impression it will be disappointing and may not even work properly.

Solution has to get an NTSC screen to play my PAL games on, as the Retro Duo likes NTSC screens. Compatible.

Best solution is to get a PSone NTSC screen - problem is shipping from the USA is expensive on these items and of course the items are quite rare. Not many e-bay sellers want to ship to the UK, another issue. I could end up having to pay about £50 shipped ($90) to get one.

Second best option is to get a Joytech GameCube NTSC screen, same size; can buy for about £35 shipped.

Image

Questions:

* Will the Joytech screen run happily on 7.4v? I don't want it if it only wants 12v

* Is the mobo for the Joytech screen a similar size to the PSone's (looks it from the pic above)?

* Is the screen quality of the Joytech similar to the PSone?

* Any issues with the GameCube screen I should be aware of?


Naturally, getting a PSone screen has to be the best scenario, I am just trying to find an alternative if I don't get lucky!
Image
sdh
Posts: 175
Joined: Tue Apr 24, 2007 8:19 am
Location: Stockholm, Sweden
Contact:

Post by sdh »

Well, I have a Joytech 5.6" GameCube screen and I'm having trouble following the screen hacking guide since the guts are different than PSone's as you can see here. One can wonder if these two GC screens have similar guts though? I hope this helps in some way.
eurddrue
Senior Member
Posts: 2367
Joined: Fri Jul 18, 2008 1:26 pm
Location: I am so caught up in real life I have to be done for a while. I'll still check in but dontexpectmuch

Post by eurddrue »

would It be cheaper if I bought one and then shipped it to you? or would it be $40 to ship to the UK?
Banned indefinitely if you desperately need to contact me STOPPHONESPAMPLOX Please dont be a dick and call for something random like "HEY YURDRUE DOO U HAZ SPAM?"
wallydawg wrote:
chainfire95 wrote:220V I believe
I think we should check to see if you can withstand 220 volts
Valium
Posts: 1412
Joined: Wed Jun 06, 2007 12:08 pm
Location: Nova Scotia, I'm over from kurt

Post by Valium »

Skip the negatives, go for a Zenith.
Image
bacteria
Portablizer Extraordinaire
Posts: 3984
Joined: Fri Apr 20, 2007 12:14 am
Location: Hampshire, UK
Contact:

Post by bacteria »

eurddrue - Nice offer, but what happens if it gets lost it transit?

Valium - Can't see a Zenith on e-bay at all.
Image
bacteria
Portablizer Extraordinaire
Posts: 3984
Joined: Fri Apr 20, 2007 12:14 am
Location: Hampshire, UK
Contact:

Post by bacteria »

Ok, just paid for an NTSC PSone screen off e-bay; coming from USA so will take several days to arrive.

Went for that option as I know the size of the mobo and it will fit, whereas buying something different, I had no guarantee it would be the same size or smaller. Can't be bigger or won't fit in my case after all.
Image
Post Reply