Looking for a special part, or have extra stuff you don't need? Trade, sell and buy it here. (Note: Transactions are not monitored by benheck.com)
Moderator: Moderators
Valium
Posts: 1412 Joined: Wed Jun 06, 2007 12:08 pm
Location: Nova Scotia, I'm over from kurt
Post
by Valium » Wed Oct 01, 2008 5:44 pm
I need a second noac, it HAS to have an NTSC cart slot, I cannot use a 60 pin with converter, desoldering it and soldering the new cart takes up too much space for what I'm planning. Good games on the chip aren't necessary, but they would definitely sweeten the deal.
UPDATE: does not need to have a cart slot anymore, I just want an NOAC with the best games out there.
Last edited by
Valium on Tue Oct 14, 2008 4:54 pm, edited 1 time in total.
ValiantVenality
Portablizer
Posts: 655 Joined: Tue Dec 13, 2005 7:31 pm
Location: Villa Park,California
Post
by ValiantVenality » Wed Oct 01, 2008 5:50 pm
i have a retro duo!!! if you want that.
VV
Valium
Posts: 1412 Joined: Wed Jun 06, 2007 12:08 pm
Location: Nova Scotia, I'm over from kurt
Post
by Valium » Wed Oct 01, 2008 5:51 pm
Complete retro duo? What are you looking for it?
Valium
Posts: 1412 Joined: Wed Jun 06, 2007 12:08 pm
Location: Nova Scotia, I'm over from kurt
Post
by Valium » Thu Oct 02, 2008 4:32 am
weaponepsilon wrote: Don't forget about my SJ3 in my trade thread....
If you give me the go ahead that it actually works, I'll buy it.
VV, I don't want the retro duo for this current project, it's too big, but I do for another. So shoot me a pm and lets lay down some figures
weaponepsilon
Posts: 1090 Joined: Fri Jan 11, 2008 12:04 am
Post
by weaponepsilon » Thu Oct 02, 2008 9:15 am
It blips on the tv when you turn it on. I wonder if this is a version without the onboard roms. I don't have a famicom cart to test on it either. When I get my mouser order I can tear it apart and see if a NES cart will work on it. However, I do take trades.
Valium
Posts: 1412 Joined: Wed Jun 06, 2007 12:08 pm
Location: Nova Scotia, I'm over from kurt
Post
by Valium » Thu Oct 02, 2008 11:18 am
I'd prefer it to have onboard games, and as I said in the first post, it HAS to have an NTSC cart slot. The extra space that soldering a new one on creates is just too much.
CronoTriggerfan
Moderator
Posts: 4131 Joined: Fri Jan 27, 2006 3:07 pm
Location: University of Michigan - Ann Arbor
Contact:
Post
by CronoTriggerfan » Thu Oct 02, 2008 2:15 pm
Should you not get any other offers, I've got a Yobo NOAC that I'd be willing to part with.
Valium
Posts: 1412 Joined: Wed Jun 06, 2007 12:08 pm
Location: Nova Scotia, I'm over from kurt
Post
by Valium » Sat Oct 04, 2008 9:32 am
There are NOAC's other than the Yobo with NTSC cart slots isn't there?
CTF, would you have pictures of the board? Exact measurements needed.
Valium
Posts: 1412 Joined: Wed Jun 06, 2007 12:08 pm
Location: Nova Scotia, I'm over from kurt
Post
by Valium » Sat Oct 11, 2008 6:19 am
bump
Valium
Posts: 1412 Joined: Wed Jun 06, 2007 12:08 pm
Location: Nova Scotia, I'm over from kurt
Post
by Valium » Tue Oct 14, 2008 4:53 pm
BUMPDATE, check first post.
Valium
Posts: 1412 Joined: Wed Jun 06, 2007 12:08 pm
Location: Nova Scotia, I'm over from kurt
Post
by Valium » Wed Oct 15, 2008 2:09 pm
Aw come on people, this is important.
Valium
Posts: 1412 Joined: Wed Jun 06, 2007 12:08 pm
Location: Nova Scotia, I'm over from kurt
Post
by Valium » Thu Oct 16, 2008 6:01 pm
$20 + shipping to anyone who steps up
SnowKitty
Posts: 207 Joined: Thu Oct 16, 2008 4:00 pm
Post
by SnowKitty » Thu Oct 16, 2008 6:07 pm
Valium wrote: $20 + shipping to anyone who steps up
quite a bounty there, i see them all the time in thrift stores, if i pick pne up i'll let you know
meow
Neildo_64
Portablizer
Posts: 852 Joined: Sun Jan 29, 2006 9:09 pm
Location: Iowa
Post
by Neildo_64 » Thu Oct 16, 2008 6:08 pm
I might be able to get you a SuperJoy if that would work. I wouldn't charge u $20 though.
Last edited by
Neildo_64 on Thu Oct 16, 2008 6:11 pm, edited 1 time in total.
Current projects:
Ultimate N64 Guide
N64 Portable (x2)
NES Portable