I'm a new portabilzer, working on my first portable (An SNES). So far, everything's been going smoothly, and seems to be in order. However, I have a bit of a problem with my screen. I'm attempting to use a Casio TV-980b, but can't find any information about the board.
Specifically, I'm trying to figure out where the +5v lead goes. It doesn't match up at all with the 660 or the 680 described in the book or on this site, and I can't seem to find any information elsewhere. Any help would be much appreciated. Thanks!
HELP! Casio TV-980b
Moderator: Moderators
-
OliverAndCo
- Posts: 1
- Joined: Fri Aug 01, 2008 3:28 pm
Casio TV-980 B - Yes you can add a video input
I found this TV online for $28 + shipping. The instructions are for the Casio 980B and the 980N. Only the N has a video input. However, popping off the cover of the 980B, you can immediately see a spot on the board for the video input jack, JK250. Ground the middle circular pin at the back of it to turn on the video input. Send your composite signal to ground and one of the 4 rectangular inputs. Using a Dremel tool and drill I was able to put a small wire out the battery compartment with power and video in. Very easy. Crappy picture, but it works for what I need (security monitor).
-
mcmustang51
- Posts: 1
- Joined: Fri Sep 26, 2008 10:30 pm
-
bicostp
- Moderator
- Posts: 10491
- Joined: Mon Mar 07, 2005 5:47 pm
- Steam ID: bicostp
- Location: Spamalot
- Contact:
Does anyone even use pocket TVs anymore? I can't remember the last time I saw one in the stores, and now you can get dedicated LCD screens for around the same price. 
Twitter
http://www.pcwgaming.com" onclick="window.open(this.href);return false;
If you want a Dropbox account, please use my referral link
http://www.pcwgaming.com" onclick="window.open(this.href);return false;
If you want a Dropbox account, please use my referral link
