ZNES-40 (ZN-40 SNES portable)/Retro Duo [PICTURES! Sexyfish]

Includes but not limited to: SNES, Genesis, Sega CD, PlayStation 1, Nintendo 64, Dreamcast, Game Gear and I guess the Virtual Boy.

Moderator: Moderators

Sharp Sapphire
Portablizer
Posts: 415
Joined: Fri Feb 22, 2008 9:40 pm

Post by Sharp Sapphire »

it wasn't hard, it was just very nervous to me... as my previous attempt failed due to me being retarded... this time i was more retarded in a smart way... since I did manage to get the connector off of my old retro duo i just cut the connector on my good retro duo off... by sawing it in random places until it came off then i just added wires inbetween... wasn't hard, just bleh.

SNES Portable - almost done!!

YAY! I just gotta fix the controls... add in speakers( whenever they arrive) and i'm done!! :D[/url]


... also, i had to re-do my LED mod because i screwed up my headphone jack and sent 7.2 volts though pin 8 on the right connector of the PSone screen... oops?... so I used EIGHT 3mm LED's... nice n bright! :P
Things I need to purchase for my NES Laptop:
1X PSone screen
6X 1.2v 3500mAh sub-C's
1X 1/8'' to RCA stereo Adapater
1X Radioshack repair kit

..yeaaaaah...
Life of Brian
Moderator
Posts: 2867
Joined: Wed Aug 03, 2005 5:55 pm
Location: Oklahoma
Contact:

Post by Life of Brian »

So, what's going on with your controls? Maybe I can help?
dragonhead wrote:sweet. ive spent a third of my life on benheck!
Image
Sharp Sapphire
Portablizer
Posts: 415
Joined: Fri Feb 22, 2008 9:40 pm

Post by Sharp Sapphire »

Life of Brian wrote:So, what's going on with your controls? Maybe I can help?
They are _ALL_ flargled up... when I boot up super mario world it exits that little cutscene immediately and goes to the 'save 1, save 2, save 3' like menu... and no controls after that work... even when I disconnect the wires. >_<. Thats bad I guess...

It all started when I was trimming down the controller board on the retro duo.. and i cracked it in half. :( So i tried to scratch traces and solder wires but its a real mess... i think my controller is actually fine... as soon as I get a chance I am gonna hook up a standard SNES jack and hook it up to my unmodified SNES to see if the controller isn't the problem...

...actually, Brian, what did you do with that fried retro duo? is there any chance I can buy the controller pcb? :S
Things I need to purchase for my NES Laptop:
1X PSone screen
6X 1.2v 3500mAh sub-C's
1X 1/8'' to RCA stereo Adapater
1X Radioshack repair kit

..yeaaaaah...
Life of Brian
Moderator
Posts: 2867
Joined: Wed Aug 03, 2005 5:55 pm
Location: Oklahoma
Contact:

Post by Life of Brian »

Yes, you can have one if you'd like. How about $5 to cover shipping? PM me if you want it.
dragonhead wrote:sweet. ive spent a third of my life on benheck!
Image
Sharp Sapphire
Portablizer
Posts: 415
Joined: Fri Feb 22, 2008 9:40 pm

Post by Sharp Sapphire »

I got the new speakers working.. but i'm having a strange issue. :S

When audio signals are coming through andd the speakers are vibrating, the screen wiggles A LOT. When there is no audio coming out the screen is fine though... any help here?

Also, as soon as i get this PCB from LoB I can finish this thing! (And get the sound issue fixed)
Things I need to purchase for my NES Laptop:
1X PSone screen
6X 1.2v 3500mAh sub-C's
1X 1/8'' to RCA stereo Adapater
1X Radioshack repair kit

..yeaaaaah...
lovablechevy
Portablizer Extraordinaire
Posts: 1104
Joined: Wed Nov 01, 2006 3:09 pm
Location: busy with a project
Contact:

Post by lovablechevy »

Sharp Sapphire wrote:I got the new speakers working.. but i'm having a strange issue. :S

When audio signals are coming through andd the speakers are vibrating, the screen wiggles A LOT. When there is no audio coming out the screen is fine though... any help here?

Also, as soon as i get this PCB from LoB I can finish this thing! (And get the sound issue fixed)
is one of your audio lines accidentally connected up to the video? do you have a bridged joint? it sounds like the sound is interfering with the video. so start by looking there. make sure there is no solder accidentally connecting video and audio on the psone board and retro duo board.
they call me the Queen of Bondo, though maybe i should be called the Queen of Epoxy Putty

Image

current project - code name: blue mushroom!
Sharp Sapphire
Portablizer
Posts: 415
Joined: Fri Feb 22, 2008 9:40 pm

Post by Sharp Sapphire »

Its all been checked... nothing is bridged.. I'll check again though..

EDIT: checked.. nothing bridged

Interesting, if i unplug the speakers while its running, the wavyness goes away...
Things I need to purchase for my NES Laptop:
1X PSone screen
6X 1.2v 3500mAh sub-C's
1X 1/8'' to RCA stereo Adapater
1X Radioshack repair kit

..yeaaaaah...
Life of Brian
Moderator
Posts: 2867
Joined: Wed Aug 03, 2005 5:55 pm
Location: Oklahoma
Contact:

Post by Life of Brian »

Then it's probably your batteries - they are getting weak.
dragonhead wrote:sweet. ive spent a third of my life on benheck!
Image
Sharp Sapphire
Portablizer
Posts: 415
Joined: Fri Feb 22, 2008 9:40 pm

Post by Sharp Sapphire »

duh duh duh duh duh DIINNG.. lemme go try that out real quick!! Never thought of that! :P

Thats it! But I broke a part of my battery charger. >:{ So i'm going to have to order either just the temperature probe or the entire charger.. again :(

Edit: ..just ordered another charger.. :(
Things I need to purchase for my NES Laptop:
1X PSone screen
6X 1.2v 3500mAh sub-C's
1X 1/8'' to RCA stereo Adapater
1X Radioshack repair kit

..yeaaaaah...
ShockSlayer
Niblet 64
Posts: 5059
Joined: Thu Jun 29, 2006 12:47 pm
Location: In my inbox.

Post by ShockSlayer »

Nice so far. I post to say: Your cartrige cover reminds me a lot of my compo entry. I never even saw this, too.

Cant wait to see the final.

SS
http://twitter.com/ShockSlayer" onclick="window.open(this.href);return false;
eurddrue
Senior Member
Posts: 2367
Joined: Fri Jul 18, 2008 1:26 pm
Location: I am so caught up in real life I have to be done for a while. I'll still check in but dontexpectmuch

Post by eurddrue »

I hooked up my now-perfectly LED modded screen to my pNES..
don't know if you hve ever heard this one before but that sounded pretty dirty to me...
Banned indefinitely if you desperately need to contact me STOPPHONESPAMPLOX Please dont be a dick and call for something random like "HEY YURDRUE DOO U HAZ SPAM?"
wallydawg wrote:
chainfire95 wrote:220V I believe
I think we should check to see if you can withstand 220 volts
ShockSlayer
Niblet 64
Posts: 5059
Joined: Thu Jun 29, 2006 12:47 pm
Location: In my inbox.

Post by ShockSlayer »

I think we had a whole thread on that once.

Actually, I got in trouble at school once for talking about a nesp. My friend said this: Hmm, i wonder what a good name for it would be, the portable nes, that is. Nesp...nesp....nesp...

SS
http://twitter.com/ShockSlayer" onclick="window.open(this.href);return false;
grossaffe
Posts: 1450
Joined: Thu May 29, 2008 11:54 pm
Location: USA

Post by grossaffe »

ShockSlayer wrote:I think we had a whole thread on that once.

Actually, I got in trouble at school once for talking about a nesp. My friend said this: Hmm, i wonder what a good name for it would be, the portable nes, that is. Nesp...nesp....nesp...

SS
I bet you're Nesp is really small.
ShockSlayer
Niblet 64
Posts: 5059
Joined: Thu Jun 29, 2006 12:47 pm
Location: In my inbox.

Post by ShockSlayer »

I are Nesp is really small? Duz mean I can has chezburgare?

SS
http://twitter.com/ShockSlayer" onclick="window.open(this.href);return false;
eurddrue
Senior Member
Posts: 2367
Joined: Fri Jul 18, 2008 1:26 pm
Location: I am so caught up in real life I have to be done for a while. I'll still check in but dontexpectmuch

Post by eurddrue »

oh was the thread in forum 42? I'll look around
Banned indefinitely if you desperately need to contact me STOPPHONESPAMPLOX Please dont be a dick and call for something random like "HEY YURDRUE DOO U HAZ SPAM?"
wallydawg wrote:
chainfire95 wrote:220V I believe
I think we should check to see if you can withstand 220 volts
Post Reply