Includes Atari 2600, Nintendo 8-bit, Sega Master System, MSX and more!
Moderator: Moderators
gamer2
Senior Member
Posts: 3611 Joined: Tue Jul 27, 2004 12:38 pm
Location: You spam, SANTA Jason gets you!
Contact:
Post
by gamer2 » Mon Mar 07, 2005 11:46 am
i have decided to make a "handy" nes but the controller i have chose is a broken one so what wires goto what button so i can do tactiles
and what pin on the NOAC super joy 3 is pin 1
refer to the connect NES conroller to Famiclone picture diagram
please
Sparkfist
Forum Administrator
Posts: 6754 Joined: Tue Apr 20, 2004 7:12 am
Location: Michigan
Post
by Sparkfist » Mon Mar 07, 2005 1:05 pm
Well if your rewiring the controller look at Ben's book and he tells what goes where and what pins go to the controller port.
As for pin one I dont know, The diagram at doomportables shows it on the right side, with the cart port away from you and pointing up.
vskid wrote: Nerd = likes school, does all their homework, dies if they don't get 100% on every assignment
Geek = likes technology, dies if the power goes out and his UPS dies too
I am a geek.
Guest
Post
by Guest » Mon Mar 07, 2005 3:19 pm
gamer2 says
i dont got Ben's book we get things a little late here so i should get it in april
gamer2
Senior Member
Posts: 3611 Joined: Tue Jul 27, 2004 12:38 pm
Location: You spam, SANTA Jason gets you!
Contact:
Post
by gamer2 » Mon Mar 07, 2005 3:29 pm
Anonymous wrote: gamer2 says
i dont got Ben's book we get things a little late here so i should get it in april
Would the pin closest to the NOAC chip be pin 1 or the pin on the bottom opposite of it
what does 1/72 on gannons chart mean
gannon
Moderator
Posts: 6974 Joined: Sun Apr 04, 2004 4:48 pm
Location: Near that one big lake
Contact:
Post
by gannon » Mon Mar 07, 2005 5:36 pm
It means pins 1 and 72
gamer2
Senior Member
Posts: 3611 Joined: Tue Jul 27, 2004 12:38 pm
Location: You spam, SANTA Jason gets you!
Contact:
Post
by gamer2 » Tue Mar 08, 2005 3:08 pm
i tries to trace the wires to the buttons but i got confused and said oh heck with it so i needs help. are they like
yellow=D-pad
Brown=A
white=b
Red=start
orange=Select
gamer2
Senior Member
Posts: 3611 Joined: Tue Jul 27, 2004 12:38 pm
Location: You spam, SANTA Jason gets you!
Contact:
Post
by gamer2 » Tue Mar 08, 2005 3:50 pm
gamer2 wrote:
yellow=D-pad
Brown=A
white=b
Red=start
orange=Select
is this correct? if not correct me
gannon
Moderator
Posts: 6974 Joined: Sun Apr 04, 2004 4:48 pm
Location: Near that one big lake
Contact:
Post
by gannon » Tue Mar 08, 2005 3:54 pm
I have a megajoy II so I wouldn't know. Also, have patience
gamer2
Senior Member
Posts: 3611 Joined: Tue Jul 27, 2004 12:38 pm
Location: You spam, SANTA Jason gets you!
Contact:
Post
by gamer2 » Tue Mar 08, 2005 3:55 pm
would i need the chip on the board?
what would a mega Joy have to do with a NES controller
and what is the pin one on a Super Joy 3 for the cartrage
gamer2
Senior Member
Posts: 3611 Joined: Tue Jul 27, 2004 12:38 pm
Location: You spam, SANTA Jason gets you!
Contact:
Post
by gamer2 » Wed Mar 09, 2005 11:49 am
correct me if im wrong but
white=d-pad
Orange=A
Red=b
Brown=Start
Yellow=Select
if im wrong tell me
i did some tracing last night
Guest
Post
by Guest » Thu Mar 10, 2005 11:30 am
gamer2 wrote: correct me if im wrong but
white=d-pad
Orange=A
Red=b
Brown=Start
Yellow=Select
if im wrong tell me
i did some tracing last night
so i can assume these are correct?
SpongeBuell
Senior Member
Posts: 5190 Joined: Wed Apr 07, 2004 10:52 am
Location: Colorado
Contact:
Post
by SpongeBuell » Thu Mar 10, 2005 12:09 pm
I haven't seen it, so I'm not sure if there are multiple wires, but I'm not sure how one wire could be for an entire D-pad.
Life of Brian wrote: RYW wrote: RYW:
Rare
Yellow
Weasel
I'll be honest with you - I would have never guessed that.
gamer2
Senior Member
Posts: 3611 Joined: Tue Jul 27, 2004 12:38 pm
Location: You spam, SANTA Jason gets you!
Contact:
Post
by gamer2 » Thu Mar 10, 2005 3:02 pm
SpongeBuell wrote: I haven't seen it, so I'm not sure if there are multiple wires, but I'm not sure how one wire could be for an entire D-pad.
that is the way it was traced
gamer2
Senior Member
Posts: 3611 Joined: Tue Jul 27, 2004 12:38 pm
Location: You spam, SANTA Jason gets you!
Contact:
Post
by gamer2 » Thu Mar 10, 2005 3:41 pm
gamer2 wrote: SpongeBuell wrote: I haven't seen it, so I'm not sure if there are multiple wires, but I'm not sure how one wire could be for an entire D-pad.
that is the way it was traced
i got sick and tired after it all
what is with the shiney green things on the Controller board
gannon
Moderator
Posts: 6974 Joined: Sun Apr 04, 2004 4:48 pm
Location: Near that one big lake
Contact:
Post
by gannon » Thu Mar 10, 2005 3:55 pm
If you scan or take a picture of the controller board people could probably help you more.