So does anybody have the Super NES half from a retro duo with SNES and NES?
There are already decently made NES portables from a factory but not SNES ones so I wanna do that.
Also if someone does have it I want super Mario all stars+world.
WTB: SNES half of a retro duo?
Moderator: Moderators
-
Dr. KillGood
- Senior Member
- Posts: 2209
- Joined: Sat Jan 21, 2006 1:03 am
- Location: Earth
-
Sharp Sapphire
- Portablizer
- Posts: 415
- Joined: Fri Feb 22, 2008 9:40 pm
-
GoldenfrankO
- Posts: 1490
- Joined: Sat Apr 19, 2008 7:40 pm
- PSN Username: FullFreak
- 360 GamerTag: GoldenfrankO
-
mothatrucka
- Banned
- Posts: 588
- Joined: Sun May 04, 2008 12:21 pm
You've got it wrong. Sharp's right. Anyone who buys a Duo isn't going to want just the NES side. And to get the controllers and video out, you need all of it. Just having one half or the other doesn't work.GoldenfrankO wrote:He's not looking for that. He said Super NES, as in SNES.
And Dr.K your best bet would be to buy a broken one, or just buy the retro duo and take out the NES. I'm sure someone would be willing to buy the other half of it as long as you didn't butcher it.
-
Triton
- Moderator
- Posts: 7398
- Joined: Mon May 24, 2004 12:33 pm
- 360 GamerTag: triton199
- Steam ID: triton199
- Location: Iowa
- Contact:
wrong! its almost stupidly easy to wire up the snes half to work by itsself check the snes section for more info. havent tried the nes half standalone tho, should be just as straight forward if you bridge the correct pins so it will power onYou've got it wrong. Sharp's right. Anyone who buys a Duo isn't going to want just the NES side. And to get the controllers and video out, you need all of it. Just having one half or the other doesn't work.
Visit us at Portablesofdoom.org
-
mothatrucka
- Banned
- Posts: 588
- Joined: Sun May 04, 2008 12:21 pm
Without the front board with the power switch and controller ports? I've yet to see it done. I suppose you might be able to ditch the rear board with the power jack and video outs, but what I was saying is that you can't just take the SNES board and make something with it. The front board and the controller board are still necessary.Triton wrote:wrong! its almost stupidly easy to wire up the snes half to work by itsself check the snes section for more info. havent tried the nes half standalone tho, should be just as straight forward if you bridge the correct pins so it will power on
EDIT: To clarify what I was originally saying, before someone latched onto the insignificant part of my statement, anyone who buys the Retro Duo is buying it to USE the SNES. They aren't buying it just for the NES side. I know full well it works without the NES board, but I have not yet seen anyone make two separate portables from one Retro Duo. I've been trying, though.

