Dremcast arcade controller

LoyalistRevolt · Post by **LoyalistRevolt** » Sat Mar 08, 2008 4:13 pm

Made it from scratch.

17daysolderthannes · Post by **17daysolderthannes** » Sat Mar 08, 2008 7:58 pm

I've been in the planning stages of making one of those using that exact same method, only I was thinking of trying to make it a 3 in 1 NES, SNES, Genesis controller. Might wanna look into a sturdier case though

khaag · Post by **khaag** » Sat Mar 08, 2008 8:13 pm

LoyalistRevolt wrote:Made it from scratch.

lol, I can tell

Nice, innovative job though.

LoyalistRevolt · Post by **LoyalistRevolt** » Sat Mar 08, 2008 8:20 pm

Thanks guy this is the first time I felt I was doing something serious so your comments mean a lot to me! But I'm thinking of taking it to school and putting it in a wooden case. There is only one problem with it the characters only jump up for some reason. Keep the ideas and comments coming!

Also: I for got to put a start button and the triggers so I added a start and am putting in the triggers to night!

Update: all buttons are in and everything works Great! except those darn triggers!

17daysolderthannes · Post by **17daysolderthannes** » Sun Mar 09, 2008 3:16 pm

LoyalistRevolt wrote:Thanks guy this is the first time I felt I was doing something serious so your comments mean a lot to me! But I'm thinking of taking it to school and putting it in a wooden case. There is only one problem with it the characters only jump up for some reason. Keep the ideas and comments coming!

Also: I for got to put a start button and the triggers so I added a start and am putting in the triggers to night!

Update: all buttons are in and everything works Great! except those darn triggers!

IIRC the triggers are magnetic, so unless you rig a very elaborate extension setup, you'll have to have the triggers on the main board in their original position. So, I guess make it so the triggers can "poke out" of the case (aka shoebox).

dudex77 · Post by **dudex77** » Sun Mar 09, 2008 4:12 pm

you forgot the 'l' and 'r' buttons as well as the case

-=FamilyGuy=- · Post by **-=FamilyGuy=-** » Mon Mar 10, 2008 1:50 am

You can create digital trigger ( aka non-analog ones) but putting a switch that connect the 2 opposite connections of the lil chip under the triggers.

Just to help.

FG

project_failure · Post by **project_failure** » Tue Mar 11, 2008 12:24 am

Nice you beat me by just a couple of days. I have almost finished mine.

LoyalistRevolt · Post by **LoyalistRevolt** » Tue Mar 11, 2008 3:28 pm

project_failure wrote:Nice you beat me by just a couple of days. I have almost finished mine.

lol... I win

LoyalistRevolt · Post by **LoyalistRevolt** » Mon Mar 31, 2008 7:24 pm

-=FamilyGuy=- wrote:You can create digital trigger ( aka non-analog ones) but putting a switch that connect the 2 opposite connections of the lil chip under the triggers.

Just to help.

FG

Could you elaborate?

Well guy this actually is turning out to be a full scale arcade my friend and I cut the wood last week and I'm going to be doing all the wiring.....But I'll keep you updated.

-=FamilyGuy=- · Post by **-=FamilyGuy=-** » Mon Mar 31, 2008 8:17 pm

LoyalistRevolt wrote:
-=FamilyGuy=- wrote:You can create digital trigger ( aka non-analog ones) but putting a switch that connect the 2 opposite connections of the lil chip under the triggers.

Just to help.

FG
Could you elaborate?

There's 6 magnetic chips on a dc controller, 4 magnetic chips under the joystick, and 1 under each trigger. Each chip got 4 connections, there's 2 normal one, 1 rectangular one and 1 square one. Connect the square one to ground to mimic full-press on the joystick (Left Right Down Up) or triggers (R L).

PS: the trigger chips is located on the "upper" side of the controller.

That's it !

Tell me if you need more explanation !

FG

benheck.com Forums

Dremcast arcade controller

Dremcast arcade controller

Re: Dremcast arcade controller