Portables Questionnaire

Want to just shoot the breeze? Forum 42 is the place!

Moderator: Moderators

Post Reply
nc
Posts: 113
Joined: Mon Feb 05, 2007 4:49 am

Portables Questionnaire

Post by nc »

For my GCSE Product Design coursework I am required to have a questionaire asking people what they would like to see in a product.

As I am making a PSoneP , I felt it would probably be best to ask you guys seeing as you have heaps of experience.

Try to answer most of the questions if you can , and feel free to answer the questionaire more than once for whatever reason. it will only give me more data. Also , if you can , when replying add the answer rather than just the letter of the answer.

Question 1-

What colour would you like to see the product?

A. Black
B. White
C. Blue
D. Red
E. Green
F. Other (specify)

Question 2-

How would you like the portable to be laid out?

A. Landscape (Buttons at either side of the screen)
B. Portrait (Buttons at the bottom , screen at the top)

Question 3-

Which of these would you prefer in terms of sturdiness?

A. Well built but slightly less portable, with less chance of breaking.
B. More portable but more fragile

Question 4-

Which of these methods of case contruction do you prefer?

A. Hand built
B. Vacuum formed
C. "Frankencasing"
D. CNC cut
E. Other (Specify)

Question 5-

How would you like to see the portable finished?

A. Matte finish
B. Glossy finish

End of questions.


If anyone has any ideas for questions I can add feel free to suggest. thanks in advance to anyone who helps me out!


*Sorry if this is the wrong forum , this seemed the forum for general questions and I felt it was more suited here than to the portables forum.*
Last edited by nc on Thu Mar 06, 2008 2:33 pm, edited 2 times in total.
daguuy
Portablizer
Posts: 3666
Joined: Fri Apr 01, 2005 7:09 pm
Location: missoura

Post by daguuy »

1. Black
2. Landscape
3. well built and sturdy, but it doesn't necessarily have to be thick to achive that
4. Vacuum formed
5. Matte. It looks better and doesn't get fingerprints or scratches as easily
ImageImage
nc
Posts: 113
Joined: Mon Feb 05, 2007 4:49 am

Post by nc »

daguuy wrote:1. Black
2. Landscape
3. well built and sturdy, but it doesn't necessarily have to be thick to achive that
4. Vacuum formed
5. Matte. It looks better and doesn't get fingerprints or scratches as easily
Thanks for the response! And I guess you are correct about the thickness comment , I shall change that.
vskid
Senior Member
Posts: 6314
Joined: Fri Mar 25, 2005 8:25 am
Steam ID: vskid3

Post by vskid »

1. Black
2. Landscape
3. Well built (I generally just throw my stuff in my pocket or backpack, screen is the only part I will take the time to make sure its safe)
4. Vacuum formed/anything that makes it curved and not painful to hold
5. Matte, glare from a screen is bad enough, no need to add to it.
Image
bicostp
Moderator
Posts: 10491
Joined: Mon Mar 07, 2005 5:47 pm
Steam ID: bicostp
Location: Spamalot
Contact:

Re: Portables Questionnaire

Post by bicostp »

1. PSX gray. The PS2 is black, and PSone white shows dirt a lot.
2. Either/or. Landscape would be easier to build, and would give you more room to place buttons.
3. Small but sturdy enough that it doesn't feel like it's going to break if you pick it up. (Use support posts inside.)
4. CNC cut or molded plastic / vacuum formed.
5. Matte. Glossy shows off and amplifies every fingerprint and scratch.
Kurt_
Portablizer
Posts: 5748
Joined: Thu Nov 24, 2005 10:32 am
Steam ID: kurbert
Location: Ontario, Canada
Contact:

Post by Kurt_ »

1 Black/White/Navy
2 Landscape
3 A (Go GBO!)
4 Vac-Formed
5 Matte AND Glossy!
bacteria
Portablizer Extraordinaire
Posts: 3984
Joined: Fri Apr 20, 2007 12:14 am
Location: Hampshire, UK
Contact:

Post by bacteria »

Black (or brown, or creme).
Landscape - easier to hold and use, less ache in hands.
Well built - built to last - what's the point of spending weeks making it and it fails and falls apart?
Hand built - perspex - complete control of result, and perspex is strong.
Matt - doesn't show finger marks so easily.
Image
Tibia
Posts: 1319
Joined: Thu Feb 28, 2008 2:02 pm
PSN Username: Tibia1013
Steam ID: Mulder101361
Location: Istanbul, not Constantinople
Contact:

Post by Tibia »

1. F.- I like silver. Dark grey is nice, too.

2. B.- Landscape feels more comfortable to hold and play

3. A.- Well-built. I like stuff to last, and I'm constantly throwing things in my pack.

4.E.- I'm not too picky as long as it's well-finished to look nice and be comfortable.

5. A.- Matte- Easier to care for, much sturdier.
kasar
Posts: 634
Joined: Tue May 15, 2007 2:36 pm
Location: 127.0.0.1
Contact:

Post by kasar »

1 - Silver or "metal black"

2 - Portrait

3 - B. More portable but more fragile

4 - (I cant vote here cause I still need to learn the case construction methods ^^)

5 - A. Matte finish
Extreme_Jesus
Posts: 1293
Joined: Sat Oct 01, 2005 12:04 pm
Location: Old Hampshire, none of that New hampshire stuff....

Post by Extreme_Jesus »

doing GCSE electronics are we? :wink:


1. B - White
2. A - Landscape
3. A - Better built
4. B - Vacuum
5. B - Glossy
Neildo_64
Portablizer
Posts: 852
Joined: Sun Jan 29, 2006 9:09 pm
Location: Iowa

Post by Neildo_64 »

F. Other - It depends on what the portable is and what it looks like
B. Landscape
C. Other - Good balance between portability and durability
E. Other - Doesn't matter, as long as it looks good and functions well
A. Matte finish
Image
Current projects:
Ultimate N64 Guide
N64 Portable (x2)
NES Portable
typamc95
Senior Member
Posts: 784
Joined: Fri Jun 30, 2006 9:46 pm
Location: The bun is in your mind.

Post by typamc95 »

aabba
Image
Skyone wrote:
typamc95 wrote:There called Roto-disc.
http://www.mariowiki.com/Roto-Disc
Game, set, match!
Post Reply