If you're making a portable you probably need something to watch it on. (Unless you want to guess what's happening in the game, but I wouldn't advise that) Anyway, this forum is your "Hacking a pocket TV/screen" one-stop solution. Share your experiences and knowledge here.
Sharp Sapphire wrote:Honestly, what do most people use to power a PSone screen?
6 sub-C NiMH, with capacities varying from 3300mAh to 5000mAh (you can use a 7.2v RC car battery pack, thats usually what they're made of). Pretty much the best bang for your buck. If small size is needed, then li-ion or li-poly, but they cost a lot, tons of power for their size, though.
six of those in circuit(?, the one with 7.2V), and could i use my 9.6V Radioshack NiCD/NiMH charger to charge them? (With the appropriate connection, of course)
No store I know of sells PSone screens anymore, used is about the only way to get them.
It'll run off of 7.2v, but your diagram doesn't do what you think. You'll need 6 rechargeable batteries (1.2v each) in series (which gives you 7.2v). Series adds the voltages together, but Ah is unaffected. Parallel adds the Ah, but voltage stays the same.