If I remember correctly, SCART is just the name for that big connector that has RGB, Sync, Composite, and Left & Right Audio all in it. So, in theory, you could take the RGB lines from it and connect them to the PSOne screen.Sparkfist wrote: You mean this site. The problem is it only ouputs SCAT or what ever that signal is that the Euopenans have. You cant get PAL or NTSC, so you a little out of luck. I was kind of hoping to see if the PSone screen could be moded to work witht the GG so I can mod it to play SMS and GG games on a 5" screen, but I dont think the screen supports the input the GG can be modded to output.
gamegear screen composit input posiple?
Moderator: Moderators
mnbvcxzlkjhgfdsapoiuytrewq
Yep.goodie wrote:If I remember correctly, SCART is just the name for that big connector that has RGB, Sync, Composite, and Left & Right Audio all in it. So, in theory, you could take the RGB lines from it and connect them to the PSOne screen.Sparkfist wrote: You mean this site. The problem is it only ouputs SCAT or what ever that signal is that the Euopenans have. You cant get PAL or NTSC, so you a little out of luck. I was kind of hoping to see if the PSone screen could be moded to work witht the GG so I can mod it to play SMS and GG games on a 5" screen, but I dont think the screen supports the input the GG can be modded to output.
After looking at the page HK-47 put up it begs the question what output that modded GG had. As the SCART had lines for RGB and composite.
Well if it can do either RGB or NTSC conposite I'll keep looking into it.
Well if it can do either RGB or NTSC conposite I'll keep looking into it.
vskid wrote:Nerd = likes school, does all their homework, dies if they don't get 100% on every assignment
Geek = likes technology, dies if the power goes out and his UPS dies too
I am a geek.