PSOS powers up, screen is on, no video

If you're making a portable you probably need something to watch it on. (Unless you want to guess what's happening in the game, but I wouldn't advise that) Anyway, this forum is your "Hacking a pocket TV/screen" one-stop solution. Share your experiences and knowledge here.

Moderator: Moderators

Post Reply
ShockSlayer
Niblet 64
Posts: 5059
Joined: Thu Jun 29, 2006 12:47 pm
Location: In my inbox.

PSOS powers up, screen is on, no video

Post by ShockSlayer »

and I'm sure that video is getting to it. no sound either.

pressing volume gives me the volume bar, same with contrast
is thier a third place to connect composite video?

SS

edit:fixed contrast buttons
http://twitter.com/ShockSlayer" onclick="window.open(this.href);return false;
tom61
Senior Member
Posts: 1517
Joined: Fri Mar 25, 2005 6:51 pm

Post by tom61 »

Where do you have it connected now? Have you tried putting 5 volts on the enable pin?
ShockSlayer
Niblet 64
Posts: 5059
Joined: Thu Jun 29, 2006 12:47 pm
Location: In my inbox.

Post by ShockSlayer »

It is connected to my n64. I have tried giving it 5v from my n64 and from its 7805.

I traced to composite line to an lm1881m. what does this chip do? can I bypass it?
SS
http://twitter.com/ShockSlayer" onclick="window.open(this.href);return false;
jaimegmr
Posts: 18
Joined: Thu Jan 03, 2008 9:39 am
Location: Los Angeles, CA

Post by jaimegmr »

The LM1881 is a video sync separator which the rest of the circuitry probably relies on for sync information so I don't think you can bypass it.
Kurt_
Portablizer
Posts: 5748
Joined: Thu Nov 24, 2005 10:32 am
Steam ID: kurbert
Location: Ontario, Canada
Contact:

Post by Kurt_ »

Have to ask: Is the ribbon cable plugged in all the way and securely?

There's really only two places to connect Composite video. The pin and circle on the back are directly connected, and there's some weird spot to the right on the back that the Zenith screens use.

PSOne screen audio is always a problem. I for one broke it, and bought a separate amp for it. Saved me loads of trouble.

Connected HP pins correctly? Audio to the correct spot for composite video? Tried plugging it back in to the original connectors and getting sound from your PSOne, or can you not do that anymore?
ShockSlayer
Niblet 64
Posts: 5059
Joined: Thu Jun 29, 2006 12:47 pm
Location: In my inbox.

Post by ShockSlayer »

Kurt_ wrote:Have to ask: Is the ribbon cable plugged in all the way and securely? -yep

There's really only two places to connect Composite video. The pin and circle on the back are directly connected, and there's some weird spot to the right on the back that the Zenith screens use.

PSOne screen audio is always a problem. I for one broke it, and bought a separate amp for it. Saved me loads of trouble.

Connected HP pins correctly? -yep, twice
Audio to the correct spot for composite video? -yeah
Tried plugging it back in to the original connectors and getting sound from your PSOne,-yep, got the same thing as with the n64
or can you not do that anymore?
I'll just buy a new one. I'll sell this one for $15 or so + shipping to whomever wants it for parts or whatnot, I did the led mod with 5mm leds though(its just fatter, it lights fine.)

Any takers?

SS
http://twitter.com/ShockSlayer" onclick="window.open(this.href);return false;
Post Reply