Batteries for controller [question]

Do you have a technical question that doesn't really fit a specific console? Want some general info on electronics, hacking, making cookies, etc? Here's the place to ask! Go nuts.

Moderator: Moderators

Post Reply
projectwhat
Posts: 28
Joined: Sun Jan 28, 2007 5:49 pm

Batteries for controller [question]

Post by projectwhat »

MY wireless controller originally takes 3 3-AAA batteries. i was wanting to replace the battery type. Not sure what kind I just want a rechargeable battery with that is long lasting. Would wattage make any difference, like if I used a battery from and Ipod???

Does anyone know of A place where i can buy a battery pack with a charger?? AC or USB Charger

Edit> would this be ok to use: http://www.onlybatteries.com/showitem.a ... 2&uid=1008
and this to charge it: http://www.onlybatteries.com/showitem.a ... 2&uid=1041
Its 4 AA's it's .2 volts more...
-Ben-
Valium
Posts: 1412
Joined: Wed Jun 06, 2007 12:08 pm
Location: Nova Scotia, I'm over from kurt

Post by Valium »

3 Triple A's, thats 4.5v, some smaller RC car batteries would work. They're pretty cheap on eBay, chargers too.
Image
projectwhat
Posts: 28
Joined: Sun Jan 28, 2007 5:49 pm

Post by projectwhat »

I cant find any 4.5v battery packs on ebay or on google. would it be bad if i went with the 4.8v battery pack using the four AA's???

Not even here: http://www.onlybatterypacks.com/?gclid= ... OAodVgSkXQ
-Ben-
Valium
Posts: 1412
Joined: Wed Jun 06, 2007 12:08 pm
Location: Nova Scotia, I'm over from kurt

Post by Valium »

4.8v should be fine, electronics are usually fairly lenient when it comes to voltage.
Image
projectwhat
Posts: 28
Joined: Sun Jan 28, 2007 5:49 pm

Post by projectwhat »

ok thanks for the help man and two more questions i think. Will the new buttons I put in the guitar affect battery life???

and if I go with the 4.8v (which i probally will) Do you know of any kind of device that will tell me when the battery needs recharging using leds or something and/or a device that will tell me when its finished charging or how much longer???
-Ben-
projectwhat
Posts: 28
Joined: Sun Jan 28, 2007 5:49 pm

Post by projectwhat »

ok thanks for the help man and two more questions i think. Will the new buttons I put in the guitar affect battery life???

and if I go with the 4.8v (which i probally will) Do you know of any kind of device that will tell me when the battery needs recharging using leds or something and/or a device that will tell me when its finished charging or how much longer it has until being fully charged???
-Ben-
projectwhat
Posts: 28
Joined: Sun Jan 28, 2007 5:49 pm

Post by projectwhat »

My New BLog is Up!!!
This one here: http://ultimods.hyperphp.com/

or this one which redirect to the above: http://ultimods.podzone.net/
-Ben-
Kurt_
Portablizer
Posts: 5748
Joined: Thu Nov 24, 2005 10:32 am
Steam ID: kurbert
Location: Ontario, Canada
Contact:

Post by Kurt_ »

Why would you go with Ni-Cad?

Go with Ni-MH.
Valium
Posts: 1412
Joined: Wed Jun 06, 2007 12:08 pm
Location: Nova Scotia, I'm over from kurt

Post by Valium »

Yeah, go with a NiMh, much better than NiCad.

As for the buttons, nope, they only use power when you press them, and even then its hardly anything.

And as for the device to measure battery life, I'm not sure exactly, but you could try just wiring up an LED to it, less power means dimmer light, right.
Image
Post Reply