This project is officially dead. The last thing I ever did was remove the a/v and power plug, and that's it. I should start with something simpler, like an NES.
Sorry you guys. This can be locked now.
New N64p project: B64!!!
Moderator: Moderators
-
bacteria
- Portablizer Extraordinaire
- Posts: 3984
- Joined: Fri Apr 20, 2007 12:14 am
- Location: Hampshire, UK
- Contact:
There are enough guides and hints on the N64 forum to get to from the start to the end of the project. You don't have to use batteries, see my sticky; you could make yours use the PSone screen PSU, TI card or equivalent and run your system off mains until you buy batteries suitable - just make sure you have some room in your case to take them, if you decide to include them later.
Read the threads, all you can on this forum; they tell you all you need to know. That's how I started - research.
Don't give up before you started - building an N64p is actually not that hard, as long as you are prepared and done research.
Read the threads, all you can on this forum; they tell you all you need to know. That's how I started - research.
Don't give up before you started - building an N64p is actually not that hard, as long as you are prepared and done research.
-
kevipapo
- Posts: 17
- Joined: Fri Mar 02, 2007 8:36 pm
- Location: I can tell you, but then I'd have to kill you
Well, I have no experience in hardware whatsoever, and I'm only 13. I know how I'd do it, but I would need someone else to do it for me. I'd be better off doing an NES or SNES as my first hardware project of any source.
Thanks for the encouragement though.
Thanks for the encouragement though.
I have never soldered before...
I'm screwed
I'm screwed
-
Life of Brian
- Moderator
- Posts: 2867
- Joined: Wed Aug 03, 2005 5:55 pm
- Location: Oklahoma
- Contact:
I'll probably be labeled as a fanboy for saying this, but...kevipapo wrote:Well, I have no experience in hardware whatsoever, and I'm only 13. I know how I'd do it, but I would need someone else to do it for me. I'd be better off doing an NES or SNES as my first hardware project of any source.
Thanks for the encouragement though.
SNES FTW! They can take a lot of abuse and it's really straightforward to build one. Simple, even.
dragonhead wrote:sweet. ive spent a third of my life on benheck!

-
CronoTriggerfan
- Moderator
- Posts: 4131
- Joined: Fri Jan 27, 2006 3:07 pm
- Location: University of Michigan - Ann Arbor
- Contact:
SNES's are pretty easy and very sturdy, but I'd say the NOAC is the way to start!Life of Brian wrote:I'll probably be labeled as a fanboy for saying this, but...kevipapo wrote:Well, I have no experience in hardware whatsoever, and I'm only 13. I know how I'd do it, but I would need someone else to do it for me. I'd be better off doing an NES or SNES as my first hardware project of any source.
Thanks for the encouragement though.
SNES FTW! They can take a lot of abuse and it's really straightforward to build one. Simple, even.
CTFan
-
Life of Brian
- Moderator
- Posts: 2867
- Joined: Wed Aug 03, 2005 5:55 pm
- Location: Oklahoma
- Contact:
CronoTriggerfan wrote:SNES's are pretty easy and very sturdy, but I'd say the NOAC is the way to start!Life of Brian wrote:I'll probably be labeled as a fanboy for saying this, but...kevipapo wrote:Well, I have no experience in hardware whatsoever, and I'm only 13. I know how I'd do it, but I would need someone else to do it for me. I'd be better off doing an NES or SNES as my first hardware project of any source.
Thanks for the encouragement though.
SNES FTW! They can take a lot of abuse and it's really straightforward to build one. Simple, even.It's as easy as wiring up the A/V lines and the power, essentially, and their biggest point is that they're ridiculously cheap!
CTFan
dragonhead wrote:sweet. ive spent a third of my life on benheck!


