Calling All Portabilizers!

Want to just shoot the breeze? Forum 42 is the place!

Moderator: Moderators

Kurt_
Portablizer
Posts: 5748
Joined: Thu Nov 24, 2005 10:32 am
Steam ID: kurbert
Location: Ontario, Canada
Contact:

Post by Kurt_ »

I'm down with Dreamcast. Not too many were completed successfully, or at all. But we got lots of heads to put together now.

http://www.batteryspace.com/index.asp?P ... rodID=3314

Two of those should work fine! :P
Hey, sup?
blackbox_dev
Senior Member
Posts: 1906
Joined: Sun Jan 15, 2006 5:19 pm
Location: Formerly known as iam7805

Post by blackbox_dev »

If you can do shipping to Canada, I'll be happy to do wiring/soldering. I have good equipment (adjustable temp iron with an ultra fine tip).

-iam
I'd imagine right now you wish you were a cuttlefish...
jeffslot
Portablizer Extraordinaire
Posts: 853
Joined: Wed Jun 01, 2005 6:26 am
Location: PA
Contact:

Post by jeffslot »

iam7805,

Great to have you aboard. 1st order of business is trying to figure out what portable people want to make. Some have expressed interest in a dreamcast, but I've got to hear back from a couple more people.

Jeff S
Valium
Posts: 1412
Joined: Wed Jun 06, 2007 12:08 pm
Location: Nova Scotia, I'm over from kurt

Post by Valium »

What about a dual system PS1 and N64?

That'd be nice.
Image
nightwheel
Senior Member
Posts: 2018
Joined: Mon Mar 19, 2007 11:49 am
PSN Username: nightwheel
360 GamerTag: nightwheel94
Steam ID: nightwheel
Location: Kentucky, We are KFC
Contact:

Post by nightwheel »

Sorry I've been gone for a few days on a Order of the Arrow event. My expernice level is somewhat low. I got Ben's book as a refrence. Im trying to make a portable but im needing a screen to make it. A screen is the only thing holding me back from making it. I also bulit a working one-handed Sega Genesis controler I called the GMOTE. So yes i have some experince. I also got a lots of spare time unlike some people here.
Image

Who knows if the Namco Portable will ever become a reality? :P
bacteria
Portablizer Extraordinaire
Posts: 3984
Joined: Fri Apr 20, 2007 12:14 am
Location: Hampshire, UK
Contact:

Post by bacteria »

Kurt_ wrote:Doesn't anyone but me find it creepy how Bacteria's in his 40s and is hanging out with 10-16 year olds? (The majority, at least, is below 16)
Don't be a complete smeghead. You "hang out" with your parents and teachers, and how old are they? Anyway, I don't "hang out" with any children/youths, this is a legitimate intelligent forum, not a chatroom. The only times I speak to children/youths is as with adults - I work for the Police looking after the welfare and legal rights of criminals, people from/going to prison, and people under arrest for suspicion of crimes. A very responsible job. I hope you feel embarrased by your stupid joke (if not, consider yourself told off)! I happen to share a love of gaming and modding systems; I don't care how old people are, as long as they are intelligent. I just happen to be old enough to have played, or been able to play, early game consoles and arcade systems when they first came out!
Image
bacteria
Portablizer Extraordinaire
Posts: 3984
Joined: Fri Apr 20, 2007 12:14 am
Location: Hampshire, UK
Contact:

Post by bacteria »

jeffslot wrote:Uhm, I hate to contribute to something off topic, but I don't think anything negative should be said about someone based on their age.
....
So I'm a bacteria supporter (the forum member not the organism)! Go Bacteria!
Good on you mate. You are obviously mature, intelligent and a good judge of character!
Image
Kyo
Senior Member
Posts: 2470
Joined: Tue Jan 02, 2007 11:59 am
Location: Germany

Post by Kyo »

Nobody ever thanks kyo... :(



:D
Krepticor
Senior Member
Posts: 1567
Joined: Sun Jan 01, 2006 8:06 pm
Location: Shadow Hearts

Post by Krepticor »

think about my idea for a Psone, SNES portable, even if you use the FCtwin (keep the NOAC if you want, even better :P) th thing wouldn't be too big

also, why not consider a GBA with a video trans coder, that can be added to just about anything
I refuse to dignify myself with an intelligent and witty signature
bacteria
Portablizer Extraordinaire
Posts: 3984
Joined: Fri Apr 20, 2007 12:14 am
Location: Hampshire, UK
Contact:

Post by bacteria »

You know, since I saw this thread, I thought this was typical of my Father's logic - get someone else to do the work, "supervise", someone else to come up with the ideas and problem solve, and take the credit and get the end result with minimal effort! Think about it, he is looking to pay a few bucks an hour plus shipping (and what happens if the post loses it?); gets a system for cheap, everyone else runs about getting it working, for pocket money? ha, ha! :lol: Clever! (or perhaps I am a bit skeptical with age!)
Image
Skyone
Moderator
Posts: 6390
Joined: Tue Nov 29, 2005 8:35 pm
Location: it is a mystery
Contact:

Post by Skyone »

bacteria wrote:You know, since I saw this thread, I thought this was typical of my Father's logic - get someone else to do the work, "supervise", someone else to come up with the ideas and problem solve, and take the credit and get the end result with minimal effort! Think about it, he is looking to pay a few bucks an hour plus shipping (and what happens if the post loses it?); gets a system for cheap, everyone else runs about getting it working, for pocket money? ha, ha! :lol: Clever! (or perhaps I am a bit skeptical with age!)
Trust me, Jeff is hardly the noob. He's knowledgeable of electronics and in our case, portablization. Don't be a complete smeghead.
Kyo
Senior Member
Posts: 2470
Joined: Tue Jan 02, 2007 11:59 am
Location: Germany

Post by Kyo »

Well, I had similar thoughts at first, but then I realised that this is hardly the case. I mean he is willing to pay for shipping from like 5 people to each other and then to him. Then the parts on top, and the risk of losing everything. I highly doubt he's gonna get away any cheaper than just buying a done system from one of the members.
bacteria
Portablizer Extraordinaire
Posts: 3984
Joined: Fri Apr 20, 2007 12:14 am
Location: Hampshire, UK
Contact:

Post by bacteria »

Skyone wrote:Trust me, Jeff is hardly the noob. He's knowledgeable of electronics and in our case, portablization. Don't be a complete smeghead.
You don't understand what I was saying and completely missed the point. It is not about knowedge, credibility, ability or aptitude.

You have no legitimate reason to insult me, you are a moderator and I wouldn't expect this from you, especially unjustifyably.
Image
Skyone
Moderator
Posts: 6390
Joined: Tue Nov 29, 2005 8:35 pm
Location: it is a mystery
Contact:

Post by Skyone »

bacteria wrote:
Skyone wrote:Trust me, Jeff is hardly the noob. He's knowledgeable of electronics and in our case, portablization. Don't be a complete smeghead.
You don't understand what I was saying and completely missed the point. It is not about knowedge, credibility, ability or aptitude.

You have no legitimate reason to insult me, you are a moderator and I wouldn't expect this from you, especially unjustifyably.
Firstly, let me state that I should not be expected of better behavior just due to the fact I can lock topics. Perhaps it's not my misunderstanding that is as blatant as your creation of a misunderstanding reply? I apologize for any aforementioned and overused misunderstanding, though. Maybe what I was trying to prove is that Jeff is hardly "taking the credit," especially because he created a thread that has been bound to be read. :P

I'm still suggesting a Dreamcast laptop, shouldn't be too hard, and I can see how beautiful it will be already. I'm not too focused on the Dreamcast hacking scene; is there anything we can do to make it act more as a laptop? Perhaps hack the BIOS/firmware? (might not be legal, not worth it :P)
bacteria
Portablizer Extraordinaire
Posts: 3984
Joined: Fri Apr 20, 2007 12:14 am
Location: Hampshire, UK
Contact:

Post by bacteria »

Cool. :)

If a Dreamcast or similar project is done, can we please have the project fully illustrated and blogged, with step-by-step guides? This is especially important for when other people get handed their parts of a project as they can assist in troubleshooting where required and offering support and assistance. This will also help anyone wanting to make their own system for themselves too. (That's why I am doing so in my project).
Image
Post Reply