First off, mono as in only one speaker working.
For some reason, only one of my speakers is working with my computer. I though, well they're old, and I replaced them. Now I think it's a problem with my computer because even when headphones are plugged in, only one works. Does anyone know how to fix this problem? I am okay with opening up the computer, and I think that's the problem. Could it be software? Or the speakers even though I know it's not?
SCM
Mono... Why'd it have to be mono!?
Moderator: Moderators
-
Super Cameraman
- Posts: 1123
- Joined: Mon Feb 27, 2006 6:25 pm
Mono... Why'd it have to be mono!?
If you're looking at this post and it was made before 2008, just ignore it.
-
HotDog-Cart
- Portablizer
- Posts: 3804
- Joined: Sat Jul 16, 2005 12:07 pm
- PSN Username: Lythinca
- Steam ID: scythe_king
- Location: Your IP Address, Connecting...
- Contact:
-
bicostp
- Moderator
- Posts: 10491
- Joined: Mon Mar 07, 2005 5:47 pm
- Steam ID: bicostp
- Location: Spamalot
- Contact:
If only one speaker works, then there's a good chance your jack is worn out. That happened with our old Optiplex, so we soldered a new jack on. I don't recommend doing that if this is your primary computer we're talking about. The easiest thing to do is buy a new sound card.
Twitter
http://www.pcwgaming.com" onclick="window.open(this.href);return false;
If you want a Dropbox account, please use my referral link
http://www.pcwgaming.com" onclick="window.open(this.href);return false;
If you want a Dropbox account, please use my referral link
I second the bad jack hypothesis.
Before getting a new sound card or doing any soldering, you might try playing some music or something noisy on your computer and just moving the plug around in the jack. If the jack is going bad, usually you can wiggle around the plug and make contact well enough to get patchy stereo sound.
This would confirm a bad jack diagnosis.
Before getting a new sound card or doing any soldering, you might try playing some music or something noisy on your computer and just moving the plug around in the jack. If the jack is going bad, usually you can wiggle around the plug and make contact well enough to get patchy stereo sound.
This would confirm a bad jack diagnosis.
-
Super Cameraman
- Posts: 1123
- Joined: Mon Feb 27, 2006 6:25 pm

