FS: My Junk and Screen! 56k? Maybe.

Kurt_ · Post by **Kurt_** » Sat Jun 23, 2007 7:58 pm

Here's my junk for sale. I ship from Canada. Please know what you will be paying at your border before making an offer. I will ship everything as a gift outside of Canada.

I don't expect much for these at all. I will sell them in big chunks for cheap too. I just need some money for projects and I don't have much to sell.

I have an exam Monday and then graduation Tuesday/Wednesday, so I may not respond immediately. II will try my best.

Here's the download links for the full resolution pictures. Ads have some women that may not be fully clothed. No nudity.
* sell 001.jpg of size 3.587 MB
http://www.filefactory.com/file/be68d2/
* sell 002.jpg of size 3.881 MB
http://www.filefactory.com/file/13124d/
* sell 003.jpg of size 3.79 MB
http://www.filefactory.com/file/af2d46/
* sell 004.jpg of size 3.815 MB
http://www.filefactory.com/file/290fee/
* sell 005.jpg of size 3.677 MB
http://www.filefactory.com/file/02ca3b/

The adapters work. They're all SNES adapters (10V DC, 850 mAh), one doesn't have an end, but I have the end if you feel like re-attaching it. The little one is the Sandisk adapter. It's 12V 200-350 mAh. I don't quite remember.

The screen works. It's an Intec GC one. It's not very good quality, but it works 100%. You get what you see. I will label the spots to input stuff before I ship it out. $15 + shipping, or best offer.

All plastic things are dirt cheap. Make me an offer.

The SNES, Sandisk, and battery gauge boards are fried, and are for parts. The SNES controller port works fine, as does the Battery charger thingie, with 2 NiMH batteries.

The sandisk digital photo viewer only displays 3s. Great if you want to make a 3 machine. Has 5 SMT tact switches, SD, MMC, CF, and one other port that work fine as well. Also has 5 SMT LEDs, a composite, s-vid, and power input.

The 2 SNES boards have parts that have been taken off of them. Great if you're looking for things that look like salvaged SNES boards.

Ben's book. Make an offer.

The container has rubber pads and buttons from the SNES. Some are really dirty from previous owners. None of it is my dirt, however.

The bag has all the SNES screws I could find. None are the nintendo screws. They're all standard phillips heads ( + ).

The Sandisk remote works fine. But I broke the player.

The LCD screen is broken. Good for a mangled backlight.

Also, I have an LED mod circuit that is ready to install. Just put it in and wire the two ends to 5V and ground.

I also have a big sheet of .060 styrene, if anybody wants a piece.

Post by **Triton** » Sat Jun 23, 2007 8:10 pm

your sure the snes is dead? how much for it and some case plastic and stuff?

Kurt_ · Post by **Kurt_** » Sat Jun 23, 2007 8:25 pm

There are 2 SNESs. If they weren't dead before I took some parts off, I'm sure they are now!

Make an offer. I'm not sure what shipping would be, but for that I'm hoping for $3 + shipping. PM me zip codes for shipping, everyone.

The case plastic will not go back together. I sawed the posts off to bypass the nintendo screws.

For accurate shipping, take the picture and circle what you want. Then, email it to me or Pm me a link to it. kurtb89@hotmail.com.

Canadapost.ca is down for maintenance, so I'll get the general shipping (by weight) for you guys tomorrow. Then prices can be worked out a little better, can't they?

But for now, bedtime! Studying still tomorrow. The LAST exam, probably for this continent, for the school year (not including summer school). Bummer.

Kurt_ · Post by **Kurt_** » Sun Jun 24, 2007 10:13 am

Ok, here's the deal. My postal code is close to L9G 3Y3, it can be used for a 100% accurate quote. Quotes can be found here:

http://canadapost.ca/personal/tools/calcrate-e.asp

Here is the weights of most of the items: (not including packaging)

ALL of the plastic scraps: 1.05kg
Screen (working): 0.45kg
Adapters: 0.440kg each
Book: 0.9kg
12V 600mA adapter: 0.325kg
Sandisk remote: 0.1kg
LCD/Backlight assembly (LCD broken): 0.125kg
Power thing (from zenith screen): 0.05kg
SNES controller port: 0.075kg
SNES board (each): 0.1kg
Sandisk board: 0.1kg
All buttons/pads/reset buttons: 0.05kg
All Screws: 0.03kg
All shielding/heatsinks from SNES minis: 0.175kg

http://www.xe.com/ucc/ CURRENCY CONVERTER

Calculate shipping, then make offers. I will be shipping with airmail only, because ground across the country will probably accumulate some nasty fees, and for the extra $2 saved, it's not worth it.

To the states, it looks like 1kg of junk will go for $12.75 CAD shipping.

0.75, $12.75 CAD

0.5kg, $8.20 CAD

0.25, $6.20 CAD

Kurt_ · Post by **Kurt_** » Mon Jun 25, 2007 8:45 am

No interest? Why am I not surprised!

jeroen · Post by **jeroen** » Mon Jun 25, 2007 8:47 am

Does the screen do pal?

Kurt_ · Post by **Kurt_** » Tue Jun 26, 2007 1:03 pm

I'm not sure. It's an Intec GC screen. If it's dual, then yes, if not, it's NTSC. But I'm off for the day, I need to go graduate.

I may redo this listing as a nicer, no useless junk listing. I'll get some mod to delete this thread for me first. In fact, they could do that now, if they so desired.