Wanted: 6 MHz crystal

Looking for a special part, or have extra stuff you don't need? Trade, sell and buy it here. (Note: Transactions are not monitored by benheck.com)

Moderator: Moderators

Post Reply
vskid
Senior Member
Posts: 6314
Joined: Fri Mar 25, 2005 8:25 am
Steam ID: vskid3

Wanted: 6 MHz crystal

Post by vskid »

I need a 6 MHz crystal, would someone be kind enough to send me one for free (I might be able to pay if you want).
Looks like this:
Image

Thanks
Image
A_Username
Posts: 335
Joined: Mon Mar 13, 2006 5:00 pm
Location: Sioux Falls, SD
Contact:

Re: Wanted: 6 MHz crystal

Post by A_Username »

vskid wrote:I need a 6 MHz crystal, would someone be kind enough to send me one for free (I might be able to pay if you want).
Looks like this:
Image

Thanks
I got a whole bag of 1.5MHz and a few 3MHz, but I don't have any 6MHz. Does it have to be one 6Mhz or can it be two 3MHz or four 1.5MHz.
vskid
Senior Member
Posts: 6314
Joined: Fri Mar 25, 2005 8:25 am
Steam ID: vskid3

Post by vskid »

I honestly don't know, maybe someone like timmeh can enlighten us.
Image
Limewater
Posts: 173
Joined: Mon Apr 09, 2007 10:45 am

Post by Limewater »

Unless you're doing something really stupid with your crystal, you probably need a 6MHz crystal by itself.

You could, conceivably add a frequency doubler, but analog frequency doublers are very expensive compared to the cost of a 6MHz crystal. You also may wind up with a signal that is noisier than you would like.

Or, assuming you are using this crystal to feed a digital clock generator and you have access to the clock lines, you could cut the line and install a digital clock doubler. But again, the cost (and trouble) of doing this greatly exceed the cost of a 6MHz crystal.
vskid
Senior Member
Posts: 6314
Joined: Fri Mar 25, 2005 8:25 am
Steam ID: vskid3

Post by vskid »

I'm going to use it to overclock my GBA, so cheap and small is what I'm going for. Thanks for the info.
Image
Post Reply