Help with PSOne screen!

Mikeyman64 · Post by **Mikeyman64** » Wed Jun 06, 2007 5:24 pm

I need an alternate contact for video on my PSOne screen. I have burned the tab off of the face and the back (I've had this screen for over a year!).

Anyone?

Kurt_ · Post by **Kurt_** » Wed Jun 06, 2007 5:29 pm

Contacts for video: The pin on the bottom front. The contact on the bottom front. The trace from the pin on the bottom front. The tab on the back. The trace from the tab on the back.

Use common sense and a sharp scraping object to expose some copper trace from your video location. Flux it some, then solder there.

Mikeyman64 · Post by **Mikeyman64** » Wed Jun 06, 2007 5:31 pm

It's a little hard when the trace is about 1/2mm thick.

Kurt_ · Post by **Kurt_** » Wed Jun 06, 2007 6:09 pm

That's electronics for you! use the tip of an exacto knife, and if you're blind, a magnifying glass and your glasses. then solder carefully with a fine tip.