can someone make me a snesp please

korn788 · Post by **korn788** » Thu May 31, 2007 12:26 pm

i want to make one but don't to mess it up
i have
snes
3 contollers
i need a screen but i can get one

i want the bottom of the snes case to be used for the screen and the buttons and leave the top part the same

and how much would it be since i have almost all the parts but the screen and if someone will i say thanks :lol:

cowsgoquack101 · Post by **cowsgoquack101** » Thu May 31, 2007 4:43 pm

Well, if you want someone to build you one it'll probably cost about $100-150. I'm making one right now that'd I'd sell for $130.

So Many Kinds of Bagels · Thu May 31, 2007 5:05 pm

cowsgoquack101 wrote:Well, if you want someone to build you one it'll probably cost about $100-150. I'm making one right now that'd I'd sell for $130.

I believe he wants to build it himself.
Wait until some more experienced members come here; I don't trust myself for legitimate information. They'll come soon.

Twisted Warthog · Post by **Twisted Warthog** » Thu May 31, 2007 5:46 pm

What do you mean by more experienced members? If he wants to make one himself all he has to do is take a look at the stickeys.

extremesonic · Post by **extremesonic** » Thu May 31, 2007 6:05 pm

So Many Kinds of Bagels wrote:
cowsgoquack101 wrote:Well, if you want someone to build you one it'll probably cost about $100-150. I'm making one right now that'd I'd sell for $130.
I believe he wants to build it himself.
Wait until some more experienced members come here; I don't trust myself for legitimate information. They'll come soon.

The thread is called "can someone make me a snesp" meaning he wants someone to make it for him

Twisted Warthog · Post by **Twisted Warthog** » Thu May 31, 2007 6:22 pm

Thank you captain obvious.

But seriously i thought he wanted to make one because whats his face said he did.

korn788 · Post by **korn788** » Thu May 31, 2007 6:55 pm

i want to make one but i'm not skilled at making one

Twisted Warthog · Post by **Twisted Warthog** » Thu May 31, 2007 7:14 pm

Ohhh ok well it all adds up now.

So Many Kinds of Bagels · Thu May 31, 2007 7:22 pm

oops. I read it as "help me make" a SNESp.

Kenny_McCormic · Post by **Kenny_McCormic** » Sat Jun 02, 2007 7:38 pm

so you want somebody to make you a frankencase snesp?

korn788 · Post by **korn788** » Tue Jun 05, 2007 2:37 pm

if i can play mk1 mk2 and chrono trigger on it i'm fine but i want a gameboy like case

THON · Post by **THON** » Fri Jun 08, 2007 2:45 pm

...lol

Post by **bicostp** » Fri Jun 08, 2007 3:15 pm

korn788 wrote:if i can play mk1 mk2 and chrono trigger on it i'm fine but i want a gameboy like case

It will be an awfully big Gameboy.

If you want someone here to make a portable for you, it's going to cost a lot. (Probably $150-200) If you want Ben to make you one then it will cost even more. ($500 on up.) Remember, a lot of time and effort go into these things, so people will charge quite a bit for labor.

You're better off learning how to build one yourself. The book has step by step instructions for building a portable SNES using the newer smaller system.

THON · Post by **THON** » Fri Jun 08, 2007 3:39 pm

Bico's right, it's much easier (and fun) to build one yourself. As long as you have a soldering iron, some solder, a mini super nintendo, some good batteries, a PSone screen and Ben's book, you should be good to go. Just be sure you ask your Dad or a guardian to help you if you need it...

And also, if you're really only interested in playing Mortal Kombat and Chrono Trigger why not just buy a PSP and Midway Arcade Classics. It would be easier and probably less expensive.

Remember, a portable is usually at LEAST as big as the unit itself, so I don't think you could shove it inside a gameboy...

extremesonic · Post by **extremesonic** » Fri Jun 08, 2007 4:42 pm

bicostp wrote:
korn788 wrote:if i can play mk1 mk2 and chrono trigger on it i'm fine but i want a gameboy like case
It will be an awfully big Gameboy.