ps1 screen is trying to innoy me.

dragon · Post by **dragon** » Fri May 11, 2007 4:23 pm

i bought a new psone screen and it worked useing the av in port but no it stoped workig,
it still works if i plug it into a psone.

anyone know whats wrong and how to fix it.

Post by **bicostp** » Fri May 11, 2007 6:34 pm

Sounds like your AV cable is bad, or maybe the jack in the screen for the AV cable broke.

Please use the shift and question mark keys.

dragon · Post by **dragon** » Sat May 12, 2007 3:25 pm

i used 2 differnt av cable i checked the av conection and it seems fine. could i build a conection from parts from an old ps1 screen to in put the composte video in there?

ShockSlayer · Post by **ShockSlayer** » Sat May 12, 2007 3:51 pm

Why not take it apart and install some av jacks on the back?

SS

dragon · Post by **dragon** » Sat May 12, 2007 4:04 pm

last time i opened one up and it broke im not useing it for a portable.

ShockSlayer · Post by **ShockSlayer** » Sat May 12, 2007 4:30 pm

Your going to have to open it if you want to fx it.

SS

dragon · Post by **dragon** » Sat May 12, 2007 4:41 pm

not if i make a conection that will plug in where the ps1s connects.

ShockSlayer · Post by **ShockSlayer** » Sat May 12, 2007 4:59 pm

Well, you seem to know what to do, go ahead!

SS

dragon · Post by **dragon** » Sat May 12, 2007 5:35 pm

seem to know and know are differnt.
i tryed inputing composte in that port but it didnt work do i need to power a pin to tell it to turn on?

dragon · Post by **dragon** » Tue May 15, 2007 7:53 am

bump.

Kurt_ · Post by **Kurt_** » Tue May 15, 2007 3:09 pm

Try +5 volts to pin 12 on slot 1.

If you haven't taken it apart yet, may I ask why?

dragon · Post by **dragon** » Tue May 15, 2007 3:15 pm

i have only takeing apart the bottom of the screen because i might be able to leave it back.

do i put the video in and 5v or just one burst of 5vs?

Super Cameraman · Post by **Super Cameraman** » Tue May 15, 2007 5:51 pm

bicostp wrote:Please use the shift and question mark keys.

HA even when you told him to, he still doesn't!

dragon · Post by **dragon** » Wed May 16, 2007 2:41 pm

dragon wrote:i used 2 differnt av cable i checked the av conection and it seems fine. could i build a conection from parts from an old ps1 screen to in put the composte video in there?

i used a question mark there and here:

do i put the video in and 5v or just one burst of 5vs?

as for the shift key........................................................................................... trails off.

dragon · Post by **dragon** » Tue May 22, 2007 8:09 am

i got it working with av ports on the back but now the very top of the screen is filicking slighty is this just a lose conection or what.