New N64p project: B64!!!

Includes but not limited to: SNES, Genesis, Sega CD, PlayStation 1, Nintendo 64, Dreamcast, Game Gear and I guess the Virtual Boy.

Moderator: Moderators

kevipapo
Posts: 17
Joined: Fri Mar 02, 2007 8:36 pm
Location: I can tell you, but then I'd have to kill you

New N64p project: B64!!!

Post by kevipapo »

I'm new here, and I've decided to make an N64p. Long ago I wanted to make one, and now comes the chance. The B64 is expected to be done by the 4th week of April. I have a good idea of what it's gonna look like. I'll add pics of the sketches later. It uses 8 rechargeable 2100mAH AA batteries, power converter, and a psone screen. BTW this is my first portable.

I hope it works :wink:
I have never soldered before...
I'm screwed
jeroen
Senior Member
Posts: 1573
Joined: Mon Oct 10, 2005 7:42 am
Location: The Netherlands

Post by jeroen »

Seems like your well prepared and you know what your doing. Keep in mind though that n64's tend to fry when you look at them wrong. Or even when you don't look at them!
daguuy
Portablizer
Posts: 3666
Joined: Fri Apr 01, 2005 7:09 pm
Location: missoura

Post by daguuy »

use 6 or 7 batteries if you're using NiMHs, 8 is a little too much for the screen. And use Cs, they have much better battery life
Last edited by daguuy on Thu Apr 05, 2007 2:32 pm, edited 1 time in total.
ImageImage
ganonbanned
Senior Member
Posts: 2211
Joined: Thu Feb 16, 2006 5:58 pm
Location: Wisconsin

Post by ganonbanned »

jeroen wrote:Seems like your well prepared and you know what your doing.
is this sarcasm?

no offense, but I would try something easier first. the first protable I attempted was a PS1. that fried. than, a Dreamcast, which is just as hard as N64. that is still sitting taken apart in my room.

I reccomend buying bens book and trying a NES portable. :o
jeroen
Senior Member
Posts: 1573
Joined: Mon Oct 10, 2005 7:42 am
Location: The Netherlands

Post by jeroen »

ganonbanned wrote:
jeroen wrote:Seems like your well prepared and you know what your doing.
is this sarcasm?

no offense, but I would try something easier first. the first protable I attempted was a PS1. that fried. than, a Dreamcast, which is just as hard as N64. that is still sitting taken apart in my room.

I reccomend buying bens book and trying a NES portable. :o
No it wasn't. But at least he SEEMS to be knowing what he's doing.
I'll stop now. don't want to have a flame war. :wink:
Triton
Moderator
Posts: 7398
Joined: Mon May 24, 2004 12:33 pm
360 GamerTag: triton199
Steam ID: triton199
Location: Iowa
Contact:

Post by Triton »

2100mah? enjoy your hour of batterylife lol
vskid
Senior Member
Posts: 6314
Joined: Fri Mar 25, 2005 8:25 am
Steam ID: vskid3

Post by vskid »

Triton wrote:2100mah? enjoy your hour of batterylife lol
Especially since they are AAs, they get sucked dry almost instantly by the N64's never-satisfied power requirements.
Image
Skyone
Moderator
Posts: 6390
Joined: Tue Nov 29, 2005 8:35 pm
Location: it is a mystery
Contact:

Post by Skyone »

ganonbanned wrote:no offense, but I would try something easier first. the first protable I attempted was a PS1. that fried. than, a Dreamcast, which is just as hard as N64. that is still sitting taken apart in my room.

I reccomend buying bens book and trying a NES portable. :o
I don't know, my first portable was an N64, before I even came here.

I say give it a shot, there's no sense in making a portable you won't play versus one you will (N64).

Use 6 AAs (7.2v), and try to get them 2500mAh (if you're a power mongler). 2500mAh will still only get you about an hour of play (non-LED modded screen) sadly.

Batteries to consider:
http://www.batteryspace.com/index.asp?P ... tegory=703
http://www.batteryspace.com/index.asp?P ... rodID=2552
http://www.batteryspace.com/index.asp?P ... rodID=2314
And if you're ready to take a risk:
http://www.batteryspace.com/index.asp?P ... rodID=3119 :P
Billybb347
Posts: 55
Joined: Fri Feb 23, 2007 4:28 pm

Post by Billybb347 »

Skyone wrote: And if you're ready to take a risk:
http://www.batteryspace.com/index.asp?P ... rodID=3119 :P
Why would he use a battery that has half the voltage you need?
Image
SNESp Progress:
Have Screen fits perfectly, now to figure out how it works...
Motherboard (Fried) FC Twin & Mini SNES
Batteries 7.2V 2000mAh & 2x 9.6V 700mAh
Case ZN-40
Electronics came!
ATOMICMAN
Posts: 467
Joined: Thu Nov 09, 2006 10:45 am

Post by ATOMICMAN »

Billybb347 wrote:
Skyone wrote: And if you're ready to take a risk:
http://www.batteryspace.com/index.asp?P ... rodID=3119 :P
Why would he use a battery that has half the voltage you need?
run 2 in series for 7.2v.

super small, and good mah. those are kick ass batteries.
lifeisbetterwithketchup
Senior Member
Posts: 2180
Joined: Fri Jul 21, 2006 12:08 pm
Steam ID: lifeisbetterwithketchup
Location: Illinois. Whee.

Post by lifeisbetterwithketchup »

ATOMICMAN wrote:
Billybb347 wrote:
Skyone wrote: And if you're ready to take a risk:
http://www.batteryspace.com/index.asp?P ... rodID=3119 :P
Why would he use a battery that has half the voltage you need?
run 2 in series for 7.2v.

super small, and good mah. those are kick ass batteries.
Yeah, but you need a protection circuit too, or KABOOM!. Gamelver knows what I'm talking about.
Rekarp wrote:
mako321 wrote:What makes you head ninja, anyways? :wink:
Cause I am Abe F#!@ing Lincoln. :mrgreen:
kevipapo
Posts: 17
Joined: Fri Mar 02, 2007 8:36 pm
Location: I can tell you, but then I'd have to kill you

Post by kevipapo »

Yeah. This is my first portable, and I know that frying has happened to many other people, but I still have a good spirit. BTW the batteries are actually 2500mAH, not 2100mAH. I'm sure that the screen will run off 8 AA rechargeables, which makes 9.6 volts. And here's a pic to give you the idea of what it will be like:

Image

The game slot, jumper/expansion slot, and memory slot (on the controller) are on the back side, and what looks like an N64 controller is actually an N64 controller, I'm not gonna open it up.

Wish me luck :D
I have never soldered before...
I'm screwed
Felino
Posts: 1010
Joined: Thu Jan 18, 2007 12:51 am
Location: Australia.

Post by Felino »

AA's will never be able to supply the ampage needed.

Use c's or sub c's.
Charlie wrote:I always wanted to try wall flips, but I'm too attached to my neck.
Image
daguuy
Portablizer
Posts: 3666
Joined: Fri Apr 01, 2005 7:09 pm
Location: missoura

Post by daguuy »

the screen uses 7v-9v so use 6-7 batteries. I also suggest landscape style so it won't be too top-heavy, N64ps can get a bit chunky so be prepared for that.
ImageImage
Felino
Posts: 1010
Joined: Thu Jan 18, 2007 12:51 am
Location: Australia.

Post by Felino »

Before you go ahead with this design. Do the following.

Tape a brick to the top of an n64 controller. Try to use it for 1/2 hour. Come back to the forum.

:lol:
Charlie wrote:I always wanted to try wall flips, but I'm too attached to my neck.
Image
Post Reply