CNC portable Atari DC Adapter Question 04/03/07

usinoh · Post by **usinoh** » Wed Mar 28, 2007 12:40 pm

Rekarp wrote:
usinoh wrote: Thanks Again Usinoh. Pleasure to do business with yah.

No man, Thank you! I have wanted one of these for a couple years and now I will finally have one. Here are a few pics of the final product:

I can't wait to get this!! I would recommend Parker to anyone who needed help on a complicated project like this.

http://longhornengineer.com/

Also I had a few people offer to help me and I want to Thank everyone who offered!!

usinoh · Post by **usinoh** » Tue Apr 03, 2007 11:25 am

Does anyone know if the DC input on the CNC built Atari 2600 portable will work with a standard Atari 2600 adapter? I would hate to fry this thing.

Thanks Tim

Post by **Sparkfist** » Tue Apr 03, 2007 2:31 pm

It should but to be sure I would suggest you trace the connection on the standard Atari to see if they go to the same points or similar points on the board to the portable. There shouldn't be much difference between a standard 2600 and a portable, all the important stuff is on the 4x4 square in the middle which is what the portable uses.