Nomad Vs Exodus

JackFrost22 · Post by **JackFrost22** » Sat Jan 29, 2005 8:13 pm

http://www.benheck.com/Games/ExodusVSNomad!.htm
Its Sooooooooo cool Isn't it

Cyberblade · Post by **Cyberblade** » Sat Jan 29, 2005 9:43 pm

Wow, there sure is a lot of good stuff on there isn't there?

Unidentified Assilant · Mon Jan 31, 2005 1:21 pm

NOMAD ALL THE WAY!!!!!!!!!!!

Who am I kidding Exodus Rocks!

JackFrost22 · Post by **JackFrost22** » Mon Jan 31, 2005 4:36 pm

Go exodus!!!!!!!!!!

The Zydeco King · Post by **The Zydeco King** » Mon Jan 31, 2005 8:52 pm

Nomad with white LED mod would kick some major @$$, if only I could figure out where to solider the LEDs and what resistors to use.

Post by **SpongeBuell** » Mon Jan 31, 2005 9:13 pm

the resistors are pretty easy. Start by looking at the LED's. Multiply how many there are by the amperage they take, so 300mA would be .3A. So let's say you have 2 .3A LEDs. 2*.3 is .6. Next, look at what the voltage needs to be, let's say 3 volts. Finally, see what your source voltage is, I'd use the +5v on the 7805. So you would replace the numbers in this equation: (5-3)/.6=r needed, or 3.3 ohms (not a lot, actually)