N64 RGB?

Thegamer3000 · Post by **Thegamer3000** » Sat Feb 10, 2007 12:30 pm

My third N64 can do RGB...Yay

Do i just hook up R, G, B, and ground and give it or go or is there something else I need to do?

Post by **marshallh** » Sat Feb 10, 2007 12:36 pm

You need composite sync (C-sync) too. You can connect the Luma line on the n64 to the csync line in the PSone lcd.

Thegamer3000 · Post by **Thegamer3000** » Mon Feb 26, 2007 1:34 pm

Is there something else I need to do because i seem to be getting a dim picture. Kinda like S-Video with just the Luma (or is it Chroms?) connected.

I have my RGB lines connected directly to the chip and I think I seen somewhere that you need some kind of capacitor or something on each line.

atari2600a · Post by **atari2600a** » Mon Feb 26, 2007 1:50 pm

Make sure it's (ground? Grounded? Grount?) properly. I've seen that happen on RGB w/o ground.

Post by **marshallh** » Mon Feb 26, 2007 3:21 pm

If you're getting a dim picture, it's because the N64 rgb lines need to be amplified. Google "n64 rgb amp"

Gamerdude · Post by **Gamerdude** » Sat Mar 03, 2007 1:25 pm

Try using a 220uf capacitor on each line. This should help fix the picture

make sure to have the + side toward the system and the - side toward the monitor