Analog Stick holes.

Rellizate · Post by **Rellizate** » Sun Feb 25, 2007 6:02 am

Hello, I have wasted a lot of time trying to do this, so I thought I would ask here.

My plastic container is 5mm (0.2 inches) thick, and I was wondering how big I would have to make the hole for my analog sticks to make them go in all direction, but not create gaps when you lean them to one side.

EnterTheHatrix · Post by **EnterTheHatrix** » Sun Feb 25, 2007 6:09 am

Same size as the controllers hole...

Just grind away the inside of the case so it's the same thickness.

Rellizate · Post by **Rellizate** » Sun Feb 25, 2007 6:17 am

Right, how would I do that?

ShockSlayer · Post by **ShockSlayer** » Sun Feb 25, 2007 8:57 am

Dremel.

SS

Rellizate · Post by **Rellizate** » Sun Feb 25, 2007 9:54 am

Ok. WHich attachment?

EnterTheHatrix · Post by **EnterTheHatrix** » Sun Feb 25, 2007 11:04 am

one for grinding...

Rellizate · Post by **Rellizate** » Sun Feb 25, 2007 11:18 am

Please circle it in paint or something?

EDIT: done smaller pic

Post by **bicostp** » Sun Feb 25, 2007 11:47 am

You could just cut out the analog stick holes from the controller and bondo them in like G-force did. They'd be the right size and perfectly round.

Rellizate · Post by **Rellizate** » Sun Feb 25, 2007 11:54 am

Yes I could, but that would mean I needed to cut the holes for the bit of plastic for the analog stick plastic as well... Also, my bondo doesn't apply well over paint apparently.

EnterTheHatrix · Post by **EnterTheHatrix** » Sun Feb 25, 2007 12:25 pm

So strip off the paint and do it again.

dman762000 · Post by **dman762000** » Sun Feb 25, 2007 4:16 pm

look dude if you have that little amount of clue as to how to use a dremel then you probably dont need to be using one in the first place and I for one am not going to give you tips so you can chew off half of your fingers with your dremel

Rellizate · Post by **Rellizate** » Sun Feb 25, 2007 5:06 pm

TheOnlyOneHeFears · Post by **TheOnlyOneHeFears** » Thu Mar 01, 2007 1:18 am

dman762000 wrote:look dude if you have that little amount of clue as to how to use a dremel then you probably dont need to be using one in the first place and I for one am not going to give you tips so you can chew off half of your fingers with your dremel

Was that really necessary? He was only asking for help.

Anyway Rellizate use the two sanding drums, second row, 6th and 7th from the left. Possibly the big one in the bottom left hand corner as well.

Rellizate · Post by **Rellizate** » Thu Mar 01, 2007 7:31 am

Cool thanks. I will try that. Also, dman762000 this forum is for help. If you arn't prepared to give help, bugger off.

ShockSlayer · Post by **ShockSlayer** » Thu Mar 01, 2007 3:00 pm

Rellizate wrote:Also, duddex this forum is for help. If you arn't prepared to give help, bugger off.

I believe you are looking for dman, Dudex hasent even posted here...

SS