ds services (ds and ds lite)
Moderator: Moderators
ds services (ds and ds lite)
I am currently offering services ( parts and mods ) for the ds and ds lite.
Here's my charge list - Also, all items are free shipping, paid by me - also note, if any ds is bricked during sl1 bridging, Ill ethir fix it, or buy you a new nintendo ds for free. People get a bit scared cause they don't want their ds bricked. Well I'm good at flashing, I've practiced it. But if you don't want a flashing on it, then you can be safer using a NoPass device. Cost more then what I would charge you for your ds being flashed. For all ds equipment and repairs and stuff like that, I offer for fixing it for free. If you think that you can't do it, then send it to me. Flashing your ds (from me) you must send it to me and Ill send it back. Usally, itll take about time to get here(you must pay to ship it here, and Ill ship it back for what you shipped it at( like if you ship overnight, Ill ship overnight using the shippment paying that you pay me))
FlashMe V7 - 10$, flashes nintendo ds so you can run homebrew code from gba slot without using a passme or noPass device.
FlashMe V7 w/ gba slot device 30$ - 25$ for GBA Slot 2 device, but you must buy your own cf card and reader and writer. GBA slot 2 device is 25$ - Flashing is reduced to 5$. For a usb reader and writter, you can get one at www.natrium42.com It's around 4$
GBA Slot-2 device w/ noPass, usb reader and writter is built in, 1 gb or two gb cf card comes with it ( This is the Max media dock, look at their prices, and subtract 10$ from each device, and that's what I'll give you.)
MMD with usb cable, NoPass, and 1 Gb CF card - 10$ cheaper then datels sale price, same goes for 2 gb.
Parts -
LCD - top screen or touch screen - 30$ for each lcd
Tri-Wing scredrivers can be found on ebay for a cheap price (this screwdriver opens your NDS)
Replacement case - comes with free tri-wing screwdriver, and protective screen, make your nds look a lot better (shinier or replace the current case you have with a new one if a peice of your caseing is destroyed) - 25$
Buttens replacement - 5$ - replacement for your buttons if their destroyed.
DS SLOT 1 CART - this is very rare to find, if your ds slot 1 cart is destroyed (the slot-1 cart to hold your ds games in it) I'll fix it for 15$ _ If you don't trust me, and you still have your warrenty valid, then send your ds to nintendo for a replacement. It's free if they replace it, otherwize, if there's no warrenty, then you could pay nintendo 75$ for a replacement.
There's is no service from me for slot-2 being fixed.
Battery pack plus cover - 5$
Sound cable with speakers - there's no service since my supplyer doesn't supply that.
I accept paypal, no checks, but money orders allowed - sorry, just needed to figure out money orders.
Have any questions or concerns, feel free to email me at theribster500@aim.com or pm me
Here's my charge list - Also, all items are free shipping, paid by me - also note, if any ds is bricked during sl1 bridging, Ill ethir fix it, or buy you a new nintendo ds for free. People get a bit scared cause they don't want their ds bricked. Well I'm good at flashing, I've practiced it. But if you don't want a flashing on it, then you can be safer using a NoPass device. Cost more then what I would charge you for your ds being flashed. For all ds equipment and repairs and stuff like that, I offer for fixing it for free. If you think that you can't do it, then send it to me. Flashing your ds (from me) you must send it to me and Ill send it back. Usally, itll take about time to get here(you must pay to ship it here, and Ill ship it back for what you shipped it at( like if you ship overnight, Ill ship overnight using the shippment paying that you pay me))
FlashMe V7 - 10$, flashes nintendo ds so you can run homebrew code from gba slot without using a passme or noPass device.
FlashMe V7 w/ gba slot device 30$ - 25$ for GBA Slot 2 device, but you must buy your own cf card and reader and writer. GBA slot 2 device is 25$ - Flashing is reduced to 5$. For a usb reader and writter, you can get one at www.natrium42.com It's around 4$
GBA Slot-2 device w/ noPass, usb reader and writter is built in, 1 gb or two gb cf card comes with it ( This is the Max media dock, look at their prices, and subtract 10$ from each device, and that's what I'll give you.)
MMD with usb cable, NoPass, and 1 Gb CF card - 10$ cheaper then datels sale price, same goes for 2 gb.
Parts -
LCD - top screen or touch screen - 30$ for each lcd
Tri-Wing scredrivers can be found on ebay for a cheap price (this screwdriver opens your NDS)
Replacement case - comes with free tri-wing screwdriver, and protective screen, make your nds look a lot better (shinier or replace the current case you have with a new one if a peice of your caseing is destroyed) - 25$
Buttens replacement - 5$ - replacement for your buttons if their destroyed.
DS SLOT 1 CART - this is very rare to find, if your ds slot 1 cart is destroyed (the slot-1 cart to hold your ds games in it) I'll fix it for 15$ _ If you don't trust me, and you still have your warrenty valid, then send your ds to nintendo for a replacement. It's free if they replace it, otherwize, if there's no warrenty, then you could pay nintendo 75$ for a replacement.
There's is no service from me for slot-2 being fixed.
Battery pack plus cover - 5$
Sound cable with speakers - there's no service since my supplyer doesn't supply that.
I accept paypal, no checks, but money orders allowed - sorry, just needed to figure out money orders.
Have any questions or concerns, feel free to email me at theribster500@aim.com or pm me
Last edited by dshacker on Fri Feb 09, 2007 11:07 pm, edited 1 time in total.
Looks like you're gonna be running a nice business, I suggest you make a website for it. If you don't know how, I'm sure someone here would make you one in exchange for services. I could, but I'm just learning HTML, I'll try if you want, though. Heres my progress on my site, its under construction and I'm making it in my spare time.
-
Master of Portables
- Portablizer
- Posts: 335
- Joined: Fri Aug 04, 2006 9:48 pm
- Contact:
could you explain what v7 flash me has, is it like regular old ds firmware? does it have the "warning"screen taken out when you turn it on...
<img src="http://img168.imageshack.us/img168/1597 ... sigzg0.png">

Dragon Force pwns every other band in the world!ChronoTriggerfan wrote:you should focus all your energy on making a really pretty case
dshacker you need any other parts? I've got quite a few.

At a glance
First up - electronics!

Top Screen (great condition!)- $20 SOLD
Bottom Screen (digitizer is scratched a bit)- $25
Motherboard with Firmware V1 (F2 jumped, wires added for overclock [will remove if requested])- $13 SOLD
Speakers - $5
Wifi Antenna - $5
Battery - $3
Second - cases and buttons!

This is something special - this was painted by cennar aka Brad Lancaster himself!
Includes bottom, middle, top, stylus silo, the piece between the hinge, and the hinge clips. Some of the cart slot is missing because he was modding it for an internal GBA MP. It does not include the screws or the battery cover. - $20

Original silver case, the bottom has the screw holes melted. Includes bottom, middle, top, and stylus silo. It does not include the piece between the hinge, screws, or the hinge clips. - $15 SOLD
Buttons (see cennar's and the overview for the buttons). Included L, R, the membranes, d-pad, A/B/X/Y, start and select. - $5

At a glance
First up - electronics!

Top Screen (great condition!)- $20 SOLD
Bottom Screen (digitizer is scratched a bit)- $25
Motherboard with Firmware V1 (F2 jumped, wires added for overclock [will remove if requested])- $13 SOLD
Speakers - $5
Wifi Antenna - $5
Battery - $3
Second - cases and buttons!

This is something special - this was painted by cennar aka Brad Lancaster himself!
Includes bottom, middle, top, stylus silo, the piece between the hinge, and the hinge clips. Some of the cart slot is missing because he was modding it for an internal GBA MP. It does not include the screws or the battery cover. - $20

Original silver case, the bottom has the screw holes melted. Includes bottom, middle, top, and stylus silo. It does not include the piece between the hinge, screws, or the hinge clips. - $15 SOLD
Buttons (see cennar's and the overview for the buttons). Included L, R, the membranes, d-pad, A/B/X/Y, start and select. - $5
-
Jongamer
- Senior Member
- Posts: 2151
- Joined: Wed Dec 13, 2006 2:43 pm
- PSN Username: Geekystig790
- 360 GamerTag: Mesu Gitsune
- Location: Fairborn, Ohio
Wow the Mobo didnt last long, all the stuff I wanted to buy is all bought =(vb_master wrote:dshacker you need any other parts? I've got quite a few.
At a glance
First up - electronics!
Top Screen (great condition!)- $20 SOLD
Bottom Screen (digitizer is scratched a bit)- $25
Motherboard with Firmware V1 (F2 jumped, wires added for overclock [will remove if requested])- $13 SOLD
Speakers - $5
Wifi Antenna - $5
Battery - $3
Second - cases and buttons!
This is something special - this was painted by cennar aka Brad Lancaster himself!
Includes bottom, middle, top, stylus silo, the piece between the hinge, and the hinge clips. Some of the cart slot is missing because he was modding it for an internal GBA MP. It does not include the screws or the battery cover. - $20
Original silver case, the bottom has the screw holes melted. Includes bottom, middle, top, and stylus silo. It does not include the piece between the hinge, screws, or the hinge clips. - $15 SOLD
Buttons (see cennar's and the overview for the buttons). Included L, R, the membranes, d-pad, A/B/X/Y, start and select. - $5
Allright, flashme V7 does this. It replaces the health and warning screen with a white screen, so you don't have to touch the thing to move on. And it boot's homebrew without the need of a nopass device. Also, for the parts, I may need some to start off with, I still have yet to receive em, but what I need is the wifi antena, hm I got my casing ready at anytime, so no need for that. Allright, for now, keep these items on hold, the speakers, the wifi antena, and everything else, cause I might need em. Not sure yet.
Last edited by dshacker on Fri Feb 09, 2007 8:06 pm, edited 1 time in total.
-
Jongamer
- Senior Member
- Posts: 2151
- Joined: Wed Dec 13, 2006 2:43 pm
- PSN Username: Geekystig790
- 360 GamerTag: Mesu Gitsune
- Location: Fairborn, Ohio
Sweet, I proably send ya my DS sometime, I'll have to work it out with my parents, oops just remembered you dont take Checks/Money orders.dshacker wrote:flashme does that for you, it allows you to enable the four screen brightness controlls
Cause I needed a New Case, New Buttons, and I would like my DS flased, and I have no clue whats wrong with my touch screen.
