Includes PS2, Xbox 1, GameCube (but not the Phantom Game Console)
Moderator: Moderators
soxinrevin
Portablizer
Posts: 76 Joined: Sat May 20, 2006 4:28 pmLocation: The sunny land of Florida... and old people
Post
by soxinrevin Sat Jan 27, 2007 9:10 pm
My gamecube Portable is in the works and i wired it upd, but the only problem is it is showing up in black and white on my screen
Gamelver
Moderator
Posts: 3352 Joined: Sun Apr 04, 2004 9:03 pmLocation: in my basement, to forever work on portables ;)
Post
by Gamelver Sat Jan 27, 2007 9:12 pm
Is the video wired to the right pin (9)?
You could be using one of the s-video pins (whichever one is used for black/white or whatever
).
Without games my life would have no meaning.
Well, I guess it would, but it would be a lot less fun!!!!!!!
soxinrevin
Portablizer
Posts: 76 Joined: Sat May 20, 2006 4:28 pmLocation: The sunny land of Florida... and old people
Post
by soxinrevin Sat Jan 27, 2007 10:01 pm
I am not sure
soxinrevin
Portablizer
Posts: 76 Joined: Sat May 20, 2006 4:28 pmLocation: The sunny land of Florida... and old people
Post
by soxinrevin Sat Jan 27, 2007 10:50 pm
I figured i have the wires in the wrong spot, so i removed them and when i went to test the gc to see if it still worked the light went on for a few seconds then shut off, and now it wont turn back on
Rellizate
Posts: 732 Joined: Sat Nov 04, 2006 11:00 am
Post
by Rellizate Sun Jan 28, 2007 3:21 am
Were you holding the screen while it was on?
soxinrevin
Portablizer
Posts: 76 Joined: Sat May 20, 2006 4:28 pmLocation: The sunny land of Florida... and old people
Post
by soxinrevin Sun Jan 28, 2007 11:00 am
Rellizate wrote: Were you holding the screen while it was on?
No i wasn't
But can you tell me how i can fix my gc
Rellizate
Posts: 732 Joined: Sat Nov 04, 2006 11:00 am
Post
by Rellizate Sun Jan 28, 2007 11:02 am
Ok ok, we were trying to help.
soxinrevin
Portablizer
Posts: 76 Joined: Sat May 20, 2006 4:28 pmLocation: The sunny land of Florida... and old people
Post
by soxinrevin Sun Jan 28, 2007 11:08 am
Rellizate wrote: Ok ok, we were trying to help.
The screen still works it is just the gc it wont turn on
Rellizate
Posts: 732 Joined: Sat Nov 04, 2006 11:00 am
Post
by Rellizate Sun Jan 28, 2007 11:09 am
Right, test with your muliteter. Is it getting power?
soxinrevin
Portablizer
Posts: 76 Joined: Sat May 20, 2006 4:28 pmLocation: The sunny land of Florida... and old people
Post
by soxinrevin Sun Jan 28, 2007 11:17 am
No its not
Jongamer
Senior Member
Posts: 2151 Joined: Wed Dec 13, 2006 2:43 pmPSN Username: Geekystig790360 GamerTag: Mesu GitsuneLocation: Fairborn, Ohio
Post
by Jongamer Sun Jan 28, 2007 5:04 pm
soxinrevin wrote: No its not
Might Need a New Power Regulator.
Or you can Jump all the Pins from the Regulator Board to the Motherboard and See if that Helps, that whats I did when the Audio Components were not getting power all I had to do is jump the + 12v Pin to a Pin on the Motherboard to get the Audio Back.
).