WTB: Engraving Plastic

demonofaj · Post by **demonofaj** » Tue Dec 05, 2006 5:14 pm

I love NYC, I do, but there are no trophey shops here, and I don't like to shop online as many of you may or may not know. So from one portabalizer to another, anyone have some engraving plastic they will be willing to sell to me...Also, if you can, kick in some IDE/Ribbon cable...

Post by **gannon** » Tue Dec 05, 2006 5:42 pm

How thick/what size? I have a few 1/16" ~10"x10" sheets

demonofaj · Post by **demonofaj** » Tue Dec 05, 2006 5:55 pm

Err, hang on, to put it short, the amount as said in Ben's Book, hand made PSONEp chapter

Post by **gannon** » Tue Dec 05, 2006 5:58 pm

No clue what that is though

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Tue Dec 05, 2006 9:38 pm

demonofaj wrote:Err, hang on, to put it short, the amount as said in Ben's Book, hand made PSONEp chapter

what gannon is offering sounds right im pretty sure 1/16 is the thickness in the book

demonofaj · Post by **demonofaj** » Fri Dec 08, 2006 6:06 pm

Yup, it is! Well, exact measurements...10"*12" (l*w) of blue or something other than white. And 14"*7" of something other than white. The plastic as you guys said is 1/16" thick. And since this is for ganno, can you add along 8 6mm. tact switches, and 6 4.5 mm tact switches.

Post by **gannon** » Fri Dec 08, 2006 7:13 pm

Well, I only have white plastic and only 6mm tacts IIRC

Also, pretty sure my sheets are only 10"x10"

demonofaj · Post by **demonofaj** » Fri Dec 08, 2006 8:10 pm

*beep*, I'm not sure I want to fork over 75 bucks for Ben's kit though...

Metroid fan · Post by **Metroid fan** » Fri Dec 08, 2006 8:13 pm

It's probably worth it though as ben's kits are very very well made.

demonofaj · Post by **demonofaj** » Sat Dec 09, 2006 9:08 pm

Bump it up...b-b-bump it up!

Post by **CronoTriggerfan** » Sat Dec 09, 2006 10:21 pm

You know, you don't have to use engraving plastic for Ben's project. Plexiglass from your local Home Depot (maybe Lowe's) will do just fine.

CTFan

demonofaj · Post by **demonofaj** » Sat Dec 09, 2006 10:41 pm

Yea, but I here that the plexiglass is hard to cut, and I have no dremel. Also, I need the four C buttons of the N64. Can they be free? I'll pay shipping.