Diagram Question

Steve-o · Post by **Steve-o** » Sat Dec 02, 2006 10:56 pm

I was just wondering if this diagram I made would be correct for hooking a Psone to a Psone Screen. The power source is the 7.5v adaptor from the Psone. Any corrections would be appreciated.

Rellizate · Post by **Rellizate** » Sun Dec 03, 2006 9:29 am

Looks okay, apart from the power. The ground/negative wire is supposed to go to the other pin on the PSone MB to the pin on the right of the pin that the blue wire attaches to on the PSone Screen. Understand?

Steve-o · Post by **Steve-o** » Sun Dec 03, 2006 10:44 am

My mistake, I did have it on the pin to the right, just drew it up wrong. When I plug in the adaptor, I can feel the wires get hot, but the playstation doesn't turn on. as soon as I disconnect the green or blue wire though, it does. Any idea on what it could be?

And is this correct now?

Rellizate · Post by **Rellizate** » Sun Dec 03, 2006 10:52 am

That's what you want.[/list][/list]

Post by **CronoTriggerfan** » Sun Dec 03, 2006 10:54 am

Quick question: Is this a view from the top or bottom of the PSOne motherboard?

CTFan

Rellizate · Post by **Rellizate** » Sun Dec 03, 2006 10:59 am

My picture was from the top buttom. Don't know about his though.

Steve-o · Post by **Steve-o** » Sun Dec 03, 2006 11:00 am

Thanks Rell, and CT its from the top looking down, memory card slots on the botton facing towards you. Also for the negative to ground wire, could I attach it to the spot labeled GND 1 on the back of the Psone screen?

If I connect my blue and green wires to their proper spots, the psone will not turn on, but if I disconenct them it does, why is this?

Rellizate · Post by **Rellizate** » Sun Dec 03, 2006 11:52 am

Sorry wrong way around. Wait a sec will reverse it.

Steve-o · Post by **Steve-o** » Sun Dec 03, 2006 12:20 pm

If I turn my psone mobo to the back, the av pinouts are facing the other way, as in they are like this:

- - - - - -
- - - - - -

And not this:

- - - - - -
- - - - - -

Would this change what pinouts were correct?

Scratch my drawings, but do you get what I mean?

Rellizate · Post by **Rellizate** » Sun Dec 03, 2006 1:30 pm

Errm no...

Steve-o · Post by **Steve-o** » Sun Dec 03, 2006 4:11 pm

This is what my psone mobo looks like from the back:

Is your wiring still correct?

Rellizate · Post by **Rellizate** » Sun Dec 03, 2006 5:05 pm

No. Switch the green wire to the other point ( the point to the right of the blue wire). Then yes.

Post by **CronoTriggerfan** » Sun Dec 03, 2006 6:00 pm

Rellizate wrote:No. Switch the green wire to the other point ( the point to the right of the blue wire). Then yes.

Yeah, that looks good. Did it work for you? If so, I'll draw up a full diagram with battery and all later tonight.

CTFan

Steve-o · Post by **Steve-o** » Sun Dec 03, 2006 6:16 pm

I haven't really been able to test it, my psone mobo broke before I could, so right now I'm trying to fix that. Any advice?

Post by **Skyone** » Sun Dec 03, 2006 8:29 pm

TT_TT

I don't know how you got those other diagrams, you were actually hooking video in to ground....