how long would the snes run...

Master of Portables · Post by **Master of Portables** » Fri Nov 17, 2006 9:32 pm

with a psone led modded screen powered by 7.2volt 3300mah battery? I can not find this info anywhere

jedi knight · Post by **jedi knight** » Fri Nov 17, 2006 9:39 pm

The mini version or the big one?
edit:If you use the mini it would a little over 4 hours I think. I think the big one would last around the 3 hour mark. Someone correct me if I am wrong.

Master of Portables · Post by **Master of Portables** » Fri Nov 17, 2006 9:44 pm

mini...

jedi knight · Post by **jedi knight** » Fri Nov 17, 2006 9:47 pm

Oh oops look up

my bad.

shmagoogin77 · Post by **shmagoogin77** » Fri Nov 17, 2006 10:13 pm

with the mini i think you can get like 5 or even 6 hours

jedi knight · Post by **jedi knight** » Fri Nov 17, 2006 10:16 pm

Shows how much I know

Master of Portables · Fri Nov 17, 2006 10:19 pm

does any one know the power consumption with each item?

atari2600a · Post by **atari2600a** » Fri Nov 17, 2006 10:46 pm

Desolder & pull off the RF unit, you can probably save 50 or so mA...

Post by **Triton** » Fri Nov 17, 2006 11:30 pm

led modded screen probably draws around 400mah and the mini snes draws less than 300 i think, you should be able to run for around 5 hours

Post by **Sparkfist** » Sat Nov 18, 2006 10:05 am

According to the book the Mini-SNES uses 350mA, and couldn't find info in the book about the LED modded PSone screen but it's save to estimate between 350-500mA.

So at lowest it's 700mA an hour and at most it's 850mA an hour. So 3300/700= 4.71 hours of run time, or 3300/850= 3.88 hours. So you get at least 3.5 hours, which isn't bad considering it's made out of a console.

Master of Portables · Sat Nov 18, 2006 11:29 am

atari2600a wrote:Desolder & pull off the RF unit, you can probably save 50 or so mA...

dude, the thing doesnt have an rf unit

Post by **Skyone** » Sat Nov 18, 2006 12:37 pm

Master of Portables wrote:
atari2600a wrote:Desolder & pull off the RF unit, you can probably save 50 or so mA...
dude, the thing doesnt have an rf unit

Haha, man, atari, do you even think before you post?

Master of Portables · Post by **Master of Portables** » Sat Nov 18, 2006 6:43 pm

yay I got it working withe the screen, but the battery keeps dieing, now I have to wait for it to charge...