Has anyone worked with an Intec PS2 screen before?

CaptainWeasel · Post by **CaptainWeasel** » Fri Nov 17, 2006 10:06 am

http://www.amazon.com/Sony-Playstation- ... videogames

I have one of these screens and I am trying to make a Portable SNES within two weeks for a school assignment (I procrastinated). Has anyone used this screen before? Does anyone has a diagram that has all of the important components of this screen?

ATOMICMAN · Post by **ATOMICMAN** » Fri Nov 17, 2006 10:11 am

it might actually have the same screen in it as the ps1 screen. did you open it up yet? i would compare it to the pics and diagrams that are up for the ps1 screens.

jedi knight · Post by **jedi knight** » Fri Nov 17, 2006 3:53 pm

The intec screens aren't the greatest but if it is all you have to work with...

demonofaj · Post by **demonofaj** » Fri Nov 17, 2006 4:59 pm

*sigh*, do any of us respond to what the guy asks anymore. Go to page 2 or the Portable Screen Hacking forum Sticky, and it gives a color coded data for the wires coming out the "bottom" of the motherboard (I believe they were orange, brown, black, yellow, white and red).

CaptainWeasel · Post by **CaptainWeasel** » Fri Nov 24, 2006 8:36 pm

Ok, a few questions.

One: There are six wires coming out the motherboard that connect to a smaller board which has a switch between S-Video and Video, S-Video input, Video/Audio Left/Audio Right input, AV Multi Out, and DC In 12V. The six wires are colored as such: Red (thick), Green (thick), Yellow (thin), Black (thick), White (thin), and Red (thin), in that order. What are these wires connected to?

Two: I don't know what bulb is in the PSOne screen, but this one has a wavy bulb, M-shaped, with two white wires soldered to a seperate place on the motherboard. What are these wires connected to?

Sorry if I seem like I don't know what I am doing, I really don't.

CaptainWeasel · Post by **CaptainWeasel** » Sun Nov 26, 2006 1:56 pm

If anyone knows where I can find a schematic or something, that would be appreciated too...