Super Joy II Pinouts

Includes Atari 2600, Nintendo 8-bit, Sega Master System, MSX and more!

Moderator: Moderators

Post Reply
madhat
Posts: 24
Joined: Wed Jun 21, 2006 6:02 pm

Super Joy II Pinouts

Post by madhat »

I have a super joy II (one of these: <img src = "http://img224.imageshack.us/img224/9292/734079of3.jpg" >

I was wondering if anyone knew the pinouts on this thing, namely the five wires coming out of the bottom of the circuit near the 7805.

I know the far left one (when viewing the board oriented so you are looking at the cart port at the top with the 7805 to the left of the five wires) is power in and the one right after that is ground, but I do not know what the other three are.

Are they color coded? From left to right, they are red (power in), black (ground), green, blue, and white.
Klefmung
Senior Member
Posts: 1517
Joined: Fri Aug 05, 2005 12:23 am
Location: Crystal palace
Contact:

Post by Klefmung »

That would be a power joy two, my favorite. Just sorta do what I did and test every single wire to see if it has a video signal, a ground signal, etc. The power should be easy enough to find, since there is a regulator.
gannon wrote:hmm... *ponders about power abuse* :P
benheck wrote:Wow, guess I should have searched my own forums! Oh wait, I don't have to since the rules don't apply to me ;)
madhat
Posts: 24
Joined: Wed Jun 21, 2006 6:02 pm

Post by madhat »

Klefmung wrote:That would be a power joy two, my favorite. Just sorta do what I did and test every single wire to see if it has a video signal, a ground signal, etc. The power should be easy enough to find, since there is a regulator.
I know about power already - i got it to run off batteries. But I don't have any test equipment. I don't imagine you took notes, did you?
wrench
Posts: 23
Joined: Sun Oct 01, 2006 8:58 pm
Location: Ohio USA

Post by wrench »

Madhat wrote: the five wires coming out of the bottom
Coming out to where? The controller board? The output jacks?

Do you have any photos, and have you cut the wires already? You don't need any fancy equipment to test this stuff, once we figure out to which board the wires were going.
Preparing to Qualify...
chanticlair281
Posts: 115
Joined: Fri Jul 07, 2006 12:34 pm

Post by chanticlair281 »

W=White=Audio out.
bl=Blue=A/V ground.
G=Green=Composite Video (video).
Bl=Black=Ground.
R=Red=DC power in.
madhat
Posts: 24
Joined: Wed Jun 21, 2006 6:02 pm

Post by madhat »

chanticlair281 wrote:W=White=Audio out.
bl=Blue=A/V ground.
G=Green=Composite Video (video).
Bl=Black=Ground.
R=Red=DC power in.
Thank's chanticlair. This stuff should be stickied for future reference. I am sure other people have wondered this about this same noac.
Klefmung
Senior Member
Posts: 1517
Joined: Fri Aug 05, 2005 12:23 am
Location: Crystal palace
Contact:

Post by Klefmung »

I just went *poke this wire to a screen* No dice... *poke this wire to a screen* HEY LOOk, PICTURE!
gannon wrote:hmm... *ponders about power abuse* :P
benheck wrote:Wow, guess I should have searched my own forums! Oh wait, I don't have to since the rules don't apply to me ;)
Post Reply