RCA or Xbox To VGA

KIWIDOGGIE · Post by **KIWIDOGGIE** » Sun Oct 15, 2006 3:14 pm

Hi i have been moding systems for a while with lcd tv's and i have a crapload of LCD Monoters(bad skelling) How would i get a xbox cable to VGA or rca to VGA.

www.allenthinks.com <check it out.
Thanks

bevo · Post by **bevo** » Mon Oct 16, 2006 4:51 am

You can build a homemade VGA cable but that requires a modified BIOS if I remember correctly. The proper way to do it is to buy a X2vga2 box which takes component in (i.e. high def xbox) and converts this to VGA.

I think however you need an LCD that does sync on green.

KIWIDOGGIE · Post by **KIWIDOGGIE** » Mon Oct 16, 2006 4:57 am

custom firmware i thought that u dident need any mod.

is there any adapters that will do it

and r they they any RCA to VGA

davicoro · Post by **davicoro** » Tue Oct 17, 2006 12:10 pm

With the old x2vga (on Ebay), or the new x2vga (on they web) you can do that without any modification or modchip. they display up to 1080i

Post by **bicostp** » Tue Oct 17, 2006 1:51 pm

KIWIDOGGIE wrote:custom firmware i thought that u dident need any mod.

is there any adapters that will do it

and r they they any RCA to VGA

http://benheck.com/phpBB/viewtopic.php?t=11767

Please type in English. Not AIM. (Capitalization, write out words like "you" and "are", punctuation, etc...)

As far as I know, you need to buy a scan converter. Since computer monitors run at a different refresh rate than NTSC or PAL, you need a box to make the signal work properly. Check on Lik-Sang (sp?) for one.

Remember this will just make the regular composite signal work on a computer screen; you won't get VGA / RGB quality!