Enamel Wire

demonofaj · Post by **demonofaj** » Mon Oct 09, 2006 1:38 pm

Well, i finally bought that wire, but really, I got one that had the green kind from the shack, and when I felt it, it was 'all metal'. How do I use it, I can't strip it 'tried'...what do I do?

G-force · Post by **G-force** » Mon Oct 09, 2006 2:39 pm

You just stick it onto the hot solder and the enamel melts off. I need to get some of that stuff. Looks pretty handy.

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Mon Oct 09, 2006 5:15 pm

i just scraped the shielding off with an exacto knife

and its not "all metal" if you tested it with your multimeter you would have known

Kurt_ · Post by **Kurt_** » Tue Oct 10, 2006 8:09 am

scraping works best.

however, I think if you have 2 wires too close together (I had a wire from my protection circuit touching a sound amp wire) you get interference. But I'm crazy.

timmeh87 · Post by **timmeh87** » Tue Oct 10, 2006 12:45 pm

eh. my n64 has all the cart slot wires braided together in some weird pattern. no interference problems

Post by **Triton** » Tue Oct 10, 2006 6:37 pm

i should get some of this stuff! sounds handy lol

Turbo Tax 1.0 · Post by **Turbo Tax 1.0** » Tue Oct 10, 2006 6:41 pm

yup, it makes cart slot relocations wicked easy, i wouldnt reccomend it for other stuff though because if you move it around to much it can break.

its kinda a pain to strip though

Kenny_McCormic · Post by **Kenny_McCormic** » Sun Oct 15, 2006 11:06 am

i strip it it with a bic