is it ok to use hot glue on the cart slot pins after they're soldered to make sure none of them fall off?
also, i accidently soldered the wires from the cart slot into the holes they were in, is it OK to bridge the wire sticking out of the holes to the place where the pins from the ext. slot were?
is it OK to use hot glue on cart slot pins...
Moderator: Moderators
is it OK to use hot glue on cart slot pins...
Last edited by steeler12 on Sun Oct 08, 2006 10:01 am, edited 1 time in total.
Re: is it OK to use hot glue on cart slot pins...
Yes, thats perfectly fine, just make sure everything is done right, it would suck to have to remove all that hotglue to fix something.steeler12 wrote:is it ok to use hot glue on the cart slot pins after they're soldered to make sure none of them fall off?
-
ShockSlayer
- Niblet 64
- Posts: 5059
- Joined: Thu Jun 29, 2006 12:47 pm
- Location: In my inbox.
Re: is it OK to use hot glue on cart slot pins...
*Raises hand* Excuse me, but how does one go about getting the hotglue off?vskid wrote:just make sure everything is done right, it would suck to have to remove all that hotglue to fix something.
(Trust me, Heatshrink is better, only like, 1.00 at radioshack)
SS
http://twitter.com/ShockSlayer" onclick="window.open(this.href);return false;